News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Chain alignment for non-stock wheel

Started by rosso75, June 15, 2012, 01:18:29 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3
User actions

Pat Conlon

#30
July 09, 2012, 12:49:02 PM
You got it laddie, we are always happy to help.

With the money you saved, why not donate a couple of Euros to Marsh to help run this forum?
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

lyonsee

#31
July 10, 2012, 03:11:18 AM
Quote from: Pat Conlon on July 09, 2012, 12:49:02 PM
You got it laddie, we are always happy to help.

With the money you saved, why not donate a couple of Euros to Marsh to help run this forum?
Done

rosso75

#32
July 21, 2012, 12:33:32 AM
For the sake of anybody searching wheel mods in the future....

I got a ZX14 axle on eBay, delivered today, for $15.  It's the correct 25mm diameter, and is wide enough to span the width of the Thunderace swingarm.  The chain adjusting blocks need to be milled down a little, though that may be due to the added thickness of the powdercoating in the adjusting slot.  I'll check it when I mount it.

I still have no idea what I'm going to do about a rear brake, or what problems I'll encounter, but that's the fun, right? :crazy:
Print
Go Up Pages 1 2 3
User actions