News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

urethane engine mounts....

Started by Antonn3, July 12, 2012, 08:43:18 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Antonn3

July 12, 2012, 08:43:18 PM
Hello,
Im in the process of having some urethane engine mounts made. I know some  have replaced  the solid upper left engine mount  from metal to the rubber ones,  but what about the other mounts?
Has any one changed the other mounts to something not as soft? What about the 2 aluminum mounts at the rear of the engine, close to the breather tube?
Change all to urethane?
Your thoughts?
....the bike in question is a '85 FJ

Thanks,
Tony

FJmonkey

#1
July 12, 2012, 08:57:48 PM
Check with Randy at RPM before you commit, he is already working on this for the solid mount years... Randy has good stuff for our FJ's...
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

56 CHEVY

#2
July 12, 2012, 10:16:48 PM
Any news from Randy on the urethane motor mounts he was working on?

Antonn3

#3
July 12, 2012, 11:32:18 PM
FJmonkey , yes  I know Randy is working on urethane mounts, but in the mean time, I have the urethane from  a left over project. And  easy to turn them myself for now, until Randys are available.

Tony

racerrad8

#4
July 13, 2012, 01:20:45 PM
Still testing.

Randy - RPM
Randy - RPM
Print
Go Up Pages1
User actions