....... Mikini and Keihin carbs.

[rktmanfj]

I think its your typing style. Its very difficult to read esp for guys using their cute little hello kitty notebooks. I had to "translate" your posts myself to figure out just what you were trying to get across.

here is an example:

Hey Bill, thanks for the translation!

Whether it's on my state-of-the-art netbook (I can point you out to a great deal on one so you don't have to be jealous anymore) or my widescreen desktop, it's very hard to sort through as originally posted.

Randy T
Indy

[Brook]

..... rktmanfj
.... Your right, There has been many times, [ on other sites as well ] I have post or had a reply. And come back the next day, and wish I had'nt.
So, from now on, >> to the point, or I should say, to one point, and stop.
               Jeff 

[Brook]

...... Hey Chris,
... Yes I have the stock cable push-pull system on. The end of the cables, that mount to the carbs. are semi-tight. they seem to work well.
.. What I have not done is, with the tank on, pull on the cables. and work the throttle, to see if the RPM's  change.
..... One thing that I had to do is,  raise the back of the tank, about 1/2 inch's,  because the high 90 degree turn that the cables were making, going to the carbs., was hitting the bottom of the gas tank.... I had new cables made up.
     And like I said before, Chris, everything that I am doing to this bike, is trial and error, it might be something as simple, as the cables being pinch under the tank. 
.... I really appreciate your help. 
             Thanks Jeff 

[RichBaker]

..... Rktmanfj... Why are you lost??... What part do you not understand??....Let me know,  I will put in simple words.

Paragraphs and proper punctuation would help..... 

No offense, but your posts are almost impossible to read.... reminds me of Mazz from the Netpath list.