News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Dyna Coils - What Type?

Started by Lotsokids, July 18, 2011, 08:09:16 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Lotsokids

July 18, 2011, 08:09:16 AM
I don't know much about coil replacement.

1. Are these coils pretty much standard plug-and-play? Are they easy to install (wiring)?
2. What kind of ohms should I look for? I've seen a lot of variations.

Thanks!

U.S. Air Force sport bike instructor (initial cadre), 2007-2009

I'm an American living & working in Hungary

Pat Conlon

#1
July 19, 2011, 11:07:51 AM
Dyna green 3.0 ohm coils for the oem FJ ignition.  If you are using the Dyna 2000 ignition then you can use the grey 2.2 ohm coils.

Do the coil relay mod.  I think the added voltage to the coils does more for the energy output, than the brand of coils you use... HTH  Pat
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3
Print
Go Up Pages1
User actions