News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Carb hose question

Started by chapindad, April 21, 2011, 05:31:44 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

chapindad

April 21, 2011, 05:31:44 PM


There is a rubber vacuum hose off the right side of bike.  Mine broke off which is easy enough to fix but it looks like the hose ran back under the seat but it was already broken so I have no idea where the other end connects.  Thanks in advance...
1989 FJ1200
1987 Corvette

RichBaker

#1
April 21, 2011, 06:25:44 PM
The hose is for the vacuum sensor, goes from the #2 carb(I think, one of 'em, anyways...) to the sensor hidden behind the fairing, up front...
Rich Baker - NRA Life, AZCDL, Trail Riders of S. AZ. , AMA Life, BRC, HEAT Dirt Riders, SAMA....
Tennessee Squire
90 FJ1200, 03 WR450F ;8^P

chapindad

#2
April 21, 2011, 06:38:11 PM
Okay. I will look for it.  This is one is on either the 1 or 4 carb, depending on which way you number but it is the brake side.    But that sounds like it.  This is an 89 for what it is worth. 
1989 FJ1200
1987 Corvette

RichBaker

#3
April 21, 2011, 06:41:32 PM
Per industry standards, cylinders are numbered from L to R, from driving position...
Rich Baker - NRA Life, AZCDL, Trail Riders of S. AZ. , AMA Life, BRC, HEAT Dirt Riders, SAMA....
Tennessee Squire
90 FJ1200, 03 WR450F ;8^P
Print
Go Up Pages1
User actions