News:

           Enjoy your FJ


Main Menu

Faaarrrkkk!

Started by billwest, March 17, 2011, 03:36:20 AM

Previous topic - Next topic

billwest

Quote from: racerman_27410 on March 18, 2011, 09:12:25 AM
i like a thin film of rtv to hold the gasket in place while assembling.

I had done that.

As for my head, I sealed that with silicone as well......  :biggrin:
Sold it!

RichBaker

Quote from: racerman_27410 on March 18, 2011, 09:12:25 AM
whew.... crisis averted!  :good2:

i like a thin film of rtv to hold the gasket in place while assembling.



KOokaloo!

Never use RTV in an engine, unless the Mfgr recommends it.... in this case it would probably act as a lubricant, rather than glue....
Rich Baker - NRA Life, AZCDL, Trail Riders of S. AZ. , AMA Life, BRC, HEAT Dirt Riders, SAMA....
Tennessee Squire
90 FJ1200, 03 WR450F ;8^P

andyb

Spot of grease here and there works nicely for holding that gasket in place while you very carefully and gingerly try to get it all lined up without it falling out and costing you 20 minutes of cussin to get it all ready for the next go...
.