4-2 slip on connector pipes & slip on muffler suggestions.

[86FJNJ]

I have a stock 1986 FJ1200, I'd like to remove the stock mufflers and add some aftermarket slipon's. If anyone has these (or similar) two connector pipes that go from the 4-2 collector to the mufflers that would be great then I can run any slip ons I can find. Or if you have any slipons you want to sell too let me know.

Otherwise I was thinking of buying these 16" (400mm) Dominator slipons but wondering if anyone else has ran these or something similar and what the sound and power is like? I like the look of the 4-2 systems better than the 4-1 so want to stay with the 4-2 style and I'm ok with a louder bike so would probably remove the baffles to let them be straight through. From what I see online the full 4-2 exhaust systems are just too much money and I'm looking to do this on a budget.

I found some really cheap universal slipons online but the problem is finding the connector pipes that would work for the FJ.

https://dominator.pl/en_US/p/Yamaha-FJ-1200-Exhaust-Silencer-Muffler-ST-dB-killer-medium/1431

[Sparky84]

How about https://delkevic.com/product-category/motorcycles/motorcycles_yamaha/motorcycles_yamaha_1986-models/motorcycles_yamaha_1986-models_fj1200-1tx/#

[86FJNJ]

yes those are nice too. I found some universal slipons for $40-$70. My bike is a barn find that hasn't run in 15 years so not looking to drop big $ on a really nice exhaust.
https://www.ebay.com/itm/226415010070
https://www.ebay.com/itm/225847618938

But being universal slipons they don't come with the connector pipes so that's why I figured I'd see if anyone has those connector pipes. I found these on ebay that have a slight bend in them so they might work but they might not work so I'd have to make sure I can return them if they don't.
https://www.ebay.com/itm/355019993107
https://www.ebay.com/itm/355103452506
https://www.ebay.com/itm/385304149054


If I can't source used or piece something together on the cheap I'll go the new route from Delkevic or Dominator they both have slipon options under $400 but I was hoping to do this for about half that.

[fj1289]

I think I have what you want

Left slip on has a couple dings on the outside - looks to be from the center stand maybe?  And on the inside of the left slip on - maybe the swing arm?  Not really sure.  I bought them as is a few years ago when they popped up for sale - but staying with 4-1 stems for my bikes. 

[86FJNJ]

Thanks I just ordered a set of used F1r slipons from ebay a few days ago and these look identical to those but they haven't arrived yet, thanks for making yours available I'll let you know if for some reasons the ones I ordered don't fit

[fj1289]

Good you were able to find some