News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Kiehin race carb throttle return springs

Started by CanDman, May 21, 2019, 12:17:04 AM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

Flynt

#15
May 23, 2019, 08:46:19 AM
Quote from: JMR on May 23, 2019, 06:58:14 AM
turning the hex head under the carb top controls up or down movement of the slide. Raising the slide (turning the hex clockwise) decreases vacuum...lowering it (turning counterclockwise) increases vacuum. The center slotted screw locks down the hex head adjustment nut

That's right...  been so long I forgot how I did it.  Anyway, the adjustment is possible using vacuum port between carbs and head...

Frank
There's plenty of time for sleep in the grave...

JMR

#16
May 24, 2019, 11:09:48 AM
Quote from: Flynt on May 23, 2019, 08:46:19 AM
Quote from: JMR on May 23, 2019, 06:58:14 AM
turning the hex head under the carb top controls up or down movement of the slide. Raising the slide (turning the hex clockwise) decreases vacuum...lowering it (turning counterclockwise) increases vacuum. The center slotted screw locks down the hex head adjustment nut

That's right...  been so long I forgot how I did it.  Anyway, the adjustment is possible using vacuum port between carbs and head...

Frank
So I'm not the only guy that experiences that phenomenon.....I feel better now. :biggrin:
Print
Go Up Pages 1 2
User actions