News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

FJ1200 3CV Suspension Linkage

Started by Bantam, July 13, 2018, 10:04:50 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Bantam

July 13, 2018, 10:04:50 AM
Looking for a decent linkage, not the dog bones but the main linkage.
I could do with good bearings and pins that are not marked.
Tried e-bay but all over priced and the one I did buy was in worse condition than mine.
Otherwise I'll be turning my own pins and bronze bushing.
I'm in North Wales
FJ1200 - 1988 (on the road, brilliant)
XT660R - 2009 (on the road, great fun)
ExUp1000s - All gone now!
ZX12R - 2003 (insane)

Discovery 2 Td5 1998 - (4x4 fun)

Ford Transit Connect Van - 2009 (daily commute)

red

#1
July 13, 2018, 01:55:43 PM
Quote from: Bantam on July 13, 2018, 10:04:50 AMLooking for a decent linkage, not the dog bones but the main linkage.  I could do with good bearings and pins that are not marked.  Tried e-bay but all over priced and the one I did buy was in worse condition than mine.  Otherwise I'll be turning my own pins and bronze bushing.  I'm in North Wales.
Bantam,

Hang tough for a moment.  Certainly you can make your own parts, but people here have mixed and matched available Honda roller bearings to replace the Yamaha hardware in the shock linkage.  Those guys may chime in here, or you may need to do a Search here for the Part Numbers.

Good luck.
.
Cheers,
Red
P.S. Life is too short, and health is too valuable, to ride on cheap parade-duty tires.
Print
Go Up Pages1
User actions