WTB: 88 and up FJ1200 front fender

[outlaw4shrt]

Hi,

I'm looking for a 1988 and up FJ1200 front fender if anyone has one.  I'm located in Pinehurst, NC but am willing to pay ship.

Thanks,

Adrian

[FJ_Hooligan]

Unfortunately, my spare front fender is for an '85 FJ1100




Sorry, I just couldn't resist.

[FJmonkey]

They are all 84'+, just different colors. Its the muffler bearings you don't want to mix up.

[FJ_Hooligan]

But I read that the muffler bearings for cylinders 1 and 4 are interchangeable as are cylinders 2 and 3. 

It was on the internet.

[outlaw4shrt]

They are all the same?  Even with the early models having a 16" front wheel?  I'm actually looking to put the fender on a set of forks off of an 87 FZR1000 that I have on my XS1100.  Just going through pictures, it looks like the later model FJ1200's with 4 piston calipers and 17" front wheel use the same forks as the early FZR's.  That's great if they are all the same, do you have one of those?

[FJmonkey]

Not sure if the forks are the same but they share the bolt pattern for the Blue/Gold dot calipers. If you have an FZR fork you might need an FZR fender.

[Bezmozek]

...set of forks off of an 87 FZR1000 ...

IMHO caliper bolt pattern is same, but 1000 Genesis/Exup has 320mm front rotors and FJ has 298mm only, so pads will not sit on rotor properly.
Not sure, but I think that FZR 400/600ccm are using 298mm rotors