gas tank heat shield

[Fred]

Anyone have any recommendations on what to use to keep the heat sheild attached to the tank?

TIA

[Yamifj1200]

Anyone have any recommendations on what to use to keep the heat sheild attached to the tank?

TIA

3M spray adhesive will work... hth

Eric M

[Fred]

Anyone have any recommendations on what to use to keep the heat sheild attached to the tank?

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

[Yamifj1200]

Anyone have any recommendations on what to use to keep the heat sheild attached to the tank?

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

Check out your local Lowe's store and look at the spray adhesives. There are a few to choose from I used a high strength version..

Eric M

[jamesearthdrum]

No. 77 very good 
No. 90 will never come off 

[rlucas]

Anyone have any recommendations on what to use to keep the heat sheild attached to the tank?

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

Check out your local Lowe's store and look at the spray adhesives. There are a few to choose from I used a high strength version..

Eric M

Or any NAPA store with 3M trim adhesive. I cheated and used foil-faced adhesive-backed pipe insulation, layered. So far (several years...), so good. Not optimum, but it works.

Rossi