News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Water Level and clutch

Started by chiz, May 24, 2015, 09:37:01 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

chiz

May 24, 2015, 09:37:01 AM
Hi
I could not help but notice the 25 feet of clear vinyl 1/4 " ID coloured water inside it that I was getting funny readings when the Water Level was even with the top of my reference post as I carefully moved the other end over to each of the other three posts that were at least 10 feet in the air...... Then noticed a 3inch air bubble in the curled up mess that still lay on the ground and how difficult it was to rid the air bubble of the Water Level.

  I made me think of motorcycle hydraulics and how at least one component is lower than it's mate not to mention the numerous turns  and why it must be so difficult to get the bleeping bleep bleeping air out.
Chiz :ireful:
Print
Go Up Pages1
User actions