hey.. what's that?

[twangin4u]

Took my master cylinder off a few weeks ago at a buddies house. As I loosened the plastic containing the turn switch and horn next to the grip on the left bar this little piece of plastic fell out. At least I think it fell out of there. There were distractions  

Anyway, I've has this little piece of plastic floating around in my garage and it's sure to get lost at some point. I couldn't figure out where it went so I just put everything back together and everything works perfectly so....

Does anyone know where it goes?
'84 fj1100

[red]

Took my master cylinder off a few weeks ago at a buddies house. As I loosened the plastic containing the turn switch and horn next to the grip on the left bar this little piece of plastic fell out. At least I think it fell out of there. There were distractions  Does anyone know where it goes?  '84 fj1100

Twangin,

If you were on the choke side, then I believe that piece keeps the choke cable in the groove,
secured by a Phillips screw in that hole. It might work that way, but I'd want that piece back in there.

Cheers,
Red

[copper]

Red nailed it there is a small slot that; that piece will slide into and there is a small phillips screw holding it on. It does hold the cable in the groove, possibly to keep the cable from coming out while twisting the choke.

[twangin4u]

Right on. Thank you.