News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Rear brake pad service question

Started by Tor-King, May 06, 2014, 09:14:12 PM

Previous topic - Next topic

Tor-King

I just removed my rear brake pads and took notice that the pads had 2 shims on them.  Do I need to remove them and place them on the new pads (EBC).  It did not seem to mention them as being required?  And correct me if I am wrong...but if they are needed, do the arrows on the shims face forward?

Thanks a bunch,
Dean
1993 Yamaha FJ1200
1988 Yamaha FJ1200
1986 Yamaha FJ1200
1984 Honda Nighthawk S 750
1972 Yamaha XS-2
1972 Honda CT70
1974 Honda CT70
1992 Yamaha DT50 MX
2012 Honda CBR250R
2008 Honda CBR125R

FJmonkey

Quote from: Tor-King on May 06, 2014, 09:14:12 PM
I just removed my rear brake pads and took notice that the pads had 2 shims on them.  Do I need to remove them and place them on the new pads (EBC).  It did not seem to mention them as being required?  And correct me if I am wrong...but if they are needed, do the arrows on the shims face forward?

Thanks a bunch,
Dean

Many times the shims are an anti-squeal material... Can you describe the shims with more detail?
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

Tor-King



Many times the shims are an anti-squeal material... Can you describe the shims with more detail?

Hi there, Mark.  They are a thin metal material that clips on the back of each pad where the piston obviously presses up against.  They cover approximately half of the back of each pad.

Thanks for your help,
Dean
1993 Yamaha FJ1200
1988 Yamaha FJ1200
1986 Yamaha FJ1200
1984 Honda Nighthawk S 750
1972 Yamaha XS-2
1972 Honda CT70
1974 Honda CT70
1992 Yamaha DT50 MX
2012 Honda CBR250R
2008 Honda CBR125R

FJmonkey

Quote from: Tor-King on May 06, 2014, 09:41:46 PM


Many times the shims are an anti-squeal material... Can you describe the shims with more detail?

Hi there, Mark.  They are a thin metal material that clips on the back of each pad where the piston obviously presses up against.  They cover approximately half of the back of each pad.

Thanks for your help,
Dean

Half?
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

Tor-King

Yep, half.  I just had another look.  They are cut on a diagonal and have an arrow pointing in one direction...

Just trying to figure this one out.  I would also like to know what are their purpose?  :unknown:


Thanks,
Dean
1993 Yamaha FJ1200
1988 Yamaha FJ1200
1986 Yamaha FJ1200
1984 Honda Nighthawk S 750
1972 Yamaha XS-2
1972 Honda CT70
1974 Honda CT70
1992 Yamaha DT50 MX
2012 Honda CBR250R
2008 Honda CBR125R

Capn Ron

Yeah, that's an anti-squeal shim.  Just snap it onto the back of your new brake pads and life will be good (and quiet).   :good2:

Cap'n Ron. . .
Cap'n Ron. . .


There are two types of people in the world...Those who put people into categories...and those who don't.

Tor-King

Quote from: Capn Ron on May 06, 2014, 10:54:06 PM
Yeah, that's an anti-squeal shim.  Just snap it onto the back of your new brake pads and life will be good (and quiet).   :good2:

Cap'n Ron. . .

Thanks, Ron.
I will place them on the new pads.  Do the arrows point forward as indicated on the pads?

Dean
1993 Yamaha FJ1200
1988 Yamaha FJ1200
1986 Yamaha FJ1200
1984 Honda Nighthawk S 750
1972 Yamaha XS-2
1972 Honda CT70
1974 Honda CT70
1992 Yamaha DT50 MX
2012 Honda CBR250R
2008 Honda CBR125R