News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

CDI wiring

Started by redeemed, March 11, 2014, 03:23:48 PM

Previous topic - Next topic

redeemed

Hi All

Just bought a 84 FJ, was standing for a couple of years.
The dogs chewed of all the wires. So i'm splicing.
In need of a wiring diagram for the 4point connector. There is a orange, black and grey wire that needs to go into the 4pointer.

Thanks
H

FJmonkey

Welcome, I think the CDI wiring diagram has been posted a few times. Try the search function and also try the files section, it may have been posted there. Lots of good stuff in the files section. When you have the time, why don't you find the introduction section and tell us more about our new member. We like to hear how others came to be FJ owners.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

movenon

Quote from: redeemed on March 11, 2014, 03:23:48 PM
Hi All

Just bought a 84 FJ, was standing for a couple of years.
The dogs chewed of all the wires. So i'm splicing.
In need of a wiring diagram for the 4point connector. There is a orange, black and grey wire that needs to go into the 4pointer.

Thanks
H

I don't have the full answer for you as I have a newer model.  But in an effort to get you started and to help someone else that can can look at there 84 pin layout on the connector  I will post a pin lay out picture from another member so you can use it as a reference point.  The photo is Medrider's. TNX Medrider  :good2:  The picture is for discussion of the pin layout only. So another member with an 84 can reference it.



Those wires are the control signals from the ignition pick-up's.  Black is ground and the grey and orange are from the 2 ignition pick ups on the lower left side of the engine.  I will keep digging but that's all I can contribute at the present.
George
Life isn't about having the best, but about making the best of what you have...

1990 FJ 1200

mr blackstock

Hello,

I do not have a wiring diagram for the 85 FJ1100, but there are some for the fj1200.


http://www.fjowners.com/index.php?topic=9216.msg87299#msg87299

I hope it helps...

cheers, Gareth
Squeaky wheels always get the grease...

Yamaha FJ1100 1985

mr blackstock

G'day,
I had a quick look at the ignition box on my 85' FJ1100.
Using the picture supplied by Movenon, the following colours match the numbers:
1=orange
2=grey
3=black
4=no wire
5=red/white
6=black
7=yellow
8= no wire
9=orange
10=grey

Hope it helps...

cheers, Gareth
Squeaky wheels always get the grease...

Yamaha FJ1100 1985

Joe Sull

This may confuse you and me! I have a 85. It was made 8/84. I have a 1100L  owners manual and heres a shot of the schematic in that area



What confuses me- now that I'm trying to help is that the wire colors on the schematic don't match what I have on the 6 pin.

This is both sides of the 6 pin




This is the 4 pin and it matches the schem.




You Keep What you kill