Hope someone can help.Just put the head back on my sons FJ1200 after renewing rubber seals between head and barrel.All gone back ok cams are timed up ok but having a problem with tensioner assemblyWhen i put the tensioner body into the head it seens to make contact with the rear cam chain guide,is that correct?Hence when i put tensioner rod assembly in its impossible to screw the cap bolt on due to needing so much pressure to compress the spring assembly.Am i setting the tensioner rod incorrect as it seems to have to be in its shortest position[ prior to assembly]to be the the correct spec length.Hope this makes sense!
Check down in the General Maintenance Files for a post entitled
Cam Chain Tensioner Installation 101.
See if that helps. Pat