Does somebody here know the dimensions of bolt no. 28 below?
(http://i1117.photobucket.com/albums/k588/PussinBoots2011/SWING_ARM.png)
The PO changed these into low grade bolts... :negative:
Too easily stripped... don't ask me how I know.
Is the correct bolt dimension 5.0 mm in diameter and 50 mm length?
Thanks once again,
Nat
Ill get back to you, unless someone else gets here first
Part number is: 95811-06045-00
Which means the bolt is an M6 x 45mm length
Hooligan
Quote from: fj11.5 on June 24, 2013, 05:18:47 PM
Ill get back to you, unless someone else gets here first
shaft length 44.8mm. thread width 5.8mm. shoulder width 5.1. Shoulder length 23.9mm. 10mm hex head. 10mm nut
Wow, thanks. You guys are the best.
And I will learn how to read those part numbers.
THANK YOU!
Nat
No worries mate, ill go put this bolt back in the spare arm now :biggrin:
:hi: Metric hex head cap screws (bolts) come in two basic grades: 8.8 and 10.9...8.8 is the lesser grade at 116,000 psi tensile strength and 10.9 a higher grade at 150,000 psi tensile strength...different manufacturers will differ to some degree... :good: Guess what, among other things, I sell for a living :lol: :rofl: :rofl2:... :biggrin:
John.
This little bolt had a cute number 8 stamped on the top :biggrin: