Print Page - my fj1100 (now FJ1200) motor

Title: my fj1100 (now FJ1200) motor
Post by: ccsct203 on September 26, 2009, 09:32:02 PM

FJ1200 head, cylinder with Wiseco 10 1/2 to 1 pistons
Megacycle cams
shim under bucket w/ titanium retainers
Mikuni rs 36mm
Much more

(http://i41.photobucket.com/albums/e299/ccsct203/HPIM0020.jpg)

Title: Re: my fj1100 (now FJ1200) motor
Post by: thuber3040 on September 26, 2009, 10:12:50 PM

Nice. :good2:

What size did you go with on wiseco?
Keep us posted on how it runs!!

Title: Re: my fj1100 (now FJ1200) motor
Post by: higbonzo on September 26, 2009, 10:18:39 PM

Very nice. Should be a runner.... :good2:

Title: Re: my fj1100 (now FJ1200) motor
Post by: ccsct203 on September 27, 2009, 06:44:21 AM

I stayed with the standard 1188cc or "1200cc"
runs well with the setup i have
I may have to change my final drive
I'm running 18 and 38 sprockets
I'll report more soon
just finishing the carb tuning

Title: Re: my fj1100 (now FJ1200) motor
Post by: Sturgis_Bryan on September 29, 2009, 10:15:30 AM

Keep us updated on the carbs, I have a set that need to be installed.

Title: Re: my fj1100 (now FJ1200) motor
Post by: ccsct203 on September 29, 2009, 05:33:43 PM

will do.
I found in stock format with only a 4-1 V&H and a dyna 2000 and coils the 130 mains were to rich
I went with the 117.5 mains and at #3 on the needles

FJowners.com

General Category => Modifications => Topic started by: ccsct203 on September 26, 2009, 09:32:02 PM