FJowners.com

General Category => Maintenance => Topic started by: crzyjarmans on April 10, 2013, 11:42:35 AM

Title: need help identifing a wire
Post by: crzyjarmans on April 10, 2013, 11:42:35 AM
does anyone know what this wire plug is for?, With key on it has power, with key off, no power, Thanks for any help with this, It is on the right side of the bike under the seat
(http://fjowners.com/gallery/4/3242_10_04_13_10_38_01.jpeg)
Title: Re: need help identifing a wire
Post by: jamesearthdrum on April 10, 2013, 12:04:22 PM
I believe it is an unused assesory plug.
Title: Re: need help identifing a wire
Post by: SlowOldGuy on April 10, 2013, 12:16:25 PM
It activated a solenoid valve on models with emissions equipment installed.

Makes a nice "switched lead" for powering accessories...

DavidR.
Title: Re: need help identifing a wire
Post by: movenon on April 10, 2013, 05:28:57 PM
Quote from: SlowOldGuy on April 10, 2013, 12:16:25 PM
It activated a solenoid valve on models with emissions equipment installed.

Makes a nice "switched lead" for powering accessories...

DavidR.

Nice information !!  TNX
George
Title: Re: need help identifing a wire
Post by: crzyjarmans on April 10, 2013, 06:01:01 PM
Thanks for the info, i'm going to use it to install a power source for a usb port
Title: Re: need help identifing a wire
Post by: Dads_FJ on April 10, 2013, 06:43:47 PM
Quote from: crzyjarmans on April 10, 2013, 06:01:01 PM
Thanks for the info, i'm going to use it to install a power source for a usb port

Do you have a USB port picked out yet?  I'm considering one myself - Something marine grade or weather proof perhaps.
Title: Re: need help identifing a wire
Post by: coreyoreo on April 10, 2013, 08:15:31 PM
Quote from: Dads_FJ on April 10, 2013, 06:43:47 PM
Quote from: crzyjarmans on April 10, 2013, 06:01:01 PM
Thanks for the info, i'm going to use it to install a power source for a usb port

Do you have a USB port picked out yet?  I'm considering one myself - Something marine grade or weather proof perhaps.

+1 Shawn. I didn't even know this plug existed til I saw your post. Dug mine out (it was well hidden) & looking for a slick way to add a 12v socket also. Like to see how yours turns out.

Dads_Fj, I got my marine 12v socket off Amazon for about $5+ shipping. Not too bad.

http://www.amazon.com/Waterproof-Accessory-Lighter-Recepticle-Motorcycle/dp/B00791W8BW (http://www.amazon.com/Waterproof-Accessory-Lighter-Recepticle-Motorcycle/dp/B00791W8BW)

Here's the dual-port USB socket I plan to use, under $5 +shipping:

http://www.amazon.com/HDE%C2%AE-Compact-Socket-Power-Adapter/dp/B004Z1VYVY/ref=sr_1_10?ie=UTF8&qid=1365642673&sr=8-10&keywords=dual+12v+usb+port (http://www.amazon.com/HDE%C2%AE-Compact-Socket-Power-Adapter/dp/B004Z1VYVY/ref=sr_1_10?ie=UTF8&qid=1365642673&sr=8-10&keywords=dual+12v+usb+port)
Title: Re: need help identifing a wire
Post by: crzyjarmans on April 10, 2013, 08:37:13 PM
Quote from: coreyoreo on April 10, 2013, 08:15:31 PM
Quote from: Dads_FJ on April 10, 2013, 06:43:47 PM
Quote from: crzyjarmans on April 10, 2013, 06:01:01 PM
Thanks for the info, i'm going to use it to install a power source for a usb port

Do you have a USB port picked out yet?  I'm considering one myself - Something marine grade or weather proof perhaps.

+1 Shawn. I didn't even know this plug existed til I saw your post. Dug mine out (it was well hidden) & looking for a slick way to add a 12v socket also. Like to see how yours turns out.

Dads_Fj, I got my marine 12v socket off Amazon for about $5+ shipping. Not too bad.

http://www.amazon.com/Waterproof-Accessory-Lighter-Recepticle-Motorcycle/dp/B00791W8BW (http://www.amazon.com/Waterproof-Accessory-Lighter-Recepticle-Motorcycle/dp/B00791W8BW)

Here's the dual-port USB socket I plan to use, under $5 +shipping:

http://www.amazon.com/HDE%C2%AE-Compact-Socket-Power-Adapter/dp/B004Z1VYVY/ref=sr_1_10?ie=UTF8&qid=1365642673&sr=8-10&keywords=dual+12v+usb+port (http://www.amazon.com/HDE%C2%AE-Compact-Socket-Power-Adapter/dp/B004Z1VYVY/ref=sr_1_10?ie=UTF8&qid=1365642673&sr=8-10&keywords=dual+12v+usb+port)
I haven't bought one yet, like the one you posted, have you mounted it yet?, how did it turn out
Title: Re: need help identifing a wire
Post by: Dan Filetti on April 10, 2013, 09:31:40 PM
Quote from: coreyoreo on April 10, 2013, 08:15:31 PM

+1 Shawn. I didn't even know this plug existed til I saw your post. Dug mine out (it was well hidden) & looking for a slick way to add a 12v socket also. Like to see how yours turns out.

Dads_Fj, I got my marine 12v socket off Amazon for about $5+ shipping. Not too bad.

http://www.amazon.com/Waterproof-Accessory-Lighter-Recepticle-Motorcycle/dp/B00791W8BW (http://www.amazon.com/Waterproof-Accessory-Lighter-Recepticle-Motorcycle/dp/B00791W8BW)

Here's the dual-port USB socket I plan to use, under $5 +shipping:

http://www.amazon.com/HDE%C2%AE-Compact-Socket-Power-Adapter/dp/B004Z1VYVY/ref=sr_1_10?ie=UTF8&qid=1365642673&sr=8-10&keywords=dual+12v+usb+port (http://www.amazon.com/HDE%C2%AE-Compact-Socket-Power-Adapter/dp/B004Z1VYVY/ref=sr_1_10?ie=UTF8&qid=1365642673&sr=8-10&keywords=dual+12v+usb+port)

+2  I have exactly the same one, and a similar USB plug.

Dan
Title: Re: need help identifing a wire
Post by: coreyoreo on April 10, 2013, 11:05:22 PM
      Shawn, I don't have mine hooked up yet, simply because I'm trying to find the best location. The pics below show my "practice" right side inner panel, (hence the scratch marks) where the socket fit best, without getting in the way of the brake lines & what not, but the next pic shows the how tight the fit really is underneath. It's right up against the frame. ( you can see in the first pic how the frame runs underneath)



    I could move it around a bit I suppose, it would look better higher, I think, but if I move it too high, it'll bump up against the ignitor box. I could also bend the tabs a bit also so as not to put too much pressure on the socket itself.

Dan, I'd sure like to see how you mounted your 12v socket.

(http://i1059.photobucket.com/albums/t435/coreyoreo11/fairing1_zps79b7f670.jpg)

(http://i1059.photobucket.com/albums/t435/coreyoreo11/fairing2_zpse43878a9.jpg)

Again, I'm using a "practice" panel, not the one I will use. This is my first attempt at positioning.
Title: Re: need help identifing a wire
Post by: Dan Filetti on April 11, 2013, 08:06:55 AM
Quote from: coreyoreo on April 10, 2013, 11:05:22 PM
Dan, I'd sure like to see how you mounted your 12v socket.

Sure, but it will not help you, as it's on my GSX-R:

(http://fjowners.com/gallery/2/12_22_07_11_5_29_09.jpeg)

Dan
Title: Re: need help identifing a wire
Post by: rktmanfj on April 11, 2013, 08:31:08 AM

Looks pretty familiar, 'cept that mine is a Powerlet socket.

(http://i643.photobucket.com/albums/uu159/rktmanfj/20130411_092209_zpse734e48b.jpg)


Title: Re: need help identifing a wire
Post by: crzyjarmans on April 11, 2013, 09:42:35 AM
Thanks for the pics, I was thinking of the same location, Maybe great minds think alike :wacko3:, Only difference I was thinking was maybe on the left side, If there is enough room?, Not sure?,
Title: Re: need help identifing a wire
Post by: rktmanfj on April 11, 2013, 09:53:07 AM
Quote from: crzyjarmans on April 11, 2013, 09:42:35 AM
Thanks for the pics, I was thinking of the same location, Maybe great minds think alike :wacko3:, Only difference I was thinking was maybe on the left side, If there is enough room?, Not sure?,

If you do it on the right side, measure and drill carefully.

There's enough room there for the bottom side of the socket if you choose a shorter one and position it as shown.





Title: Re: need help identifing a wire
Post by: crzyjarmans on April 12, 2013, 12:01:58 AM
found a power outlet, not on my computer, when I can, I'll post the pics of them, along with the power outlet, I got a dual USB port to plug into it, Think this will work out just fine, Thanks again for everyone's info :i_am_so_happy:
Title: Re: need help identifing a wire
Post by: crzyjarmans on April 12, 2013, 04:06:28 PM
ok, here are a couple of pics of the power outlet I installed, I know it's a lttle crocked but it's how I could make it fit,
(http://fjowners.com/gallery/4/3242_12_04_13_2_57_52_0.jpeg)
I also bought a USB port to ether charge my iphone or plug in a mp3 player, or ?
(http://fjowners.com/gallery/4/3242_12_04_13_2_57_55_1.jpeg)
Title: Re: need help identifing a wire
Post by: dougrs on April 12, 2013, 04:38:10 PM
This was a timely thread as I found this wire recently. I like the idea of installing a power outlet.