This is a list of the complete set of Stainless Steel braided brake & clutch lines that I purchased for my FJ, in Red.....from Elite Auto Service in Scarborough, Ontario. Canada. (I have NO affiliation with the company)
Costings are all in Canadian dollars.
1 x 35/3/3/A/red* $25.00 (Left front).
1 x 34/1/3/A/red* $25.00 (Right front).
2 x 12/1/1/A/red* $15.00 each (anti-dive lines).
1 x 16/1/3/A/red* $15.00 (Rear brake line).
1 x 44/1/3/A/red* $30.00 (Clutch line, one piece from master cylinder to clutch slave unit).
3 x double banjo bolts $6.95 each
You do get plenty of single banjo bolts and crush washers included :good:
Grand total $145.85 + $18.96 HST (for Ontario residents) = $164.81 (Be aware, I picked up so no delivery costings).
Please note: *also in clear/black or Blue, substitute red for preferred colour.
Check website before ordering... in case I made a typing error!!!
Elite Auto Service
3360, Midland Avenue,
Unit A & B,
Scarborough.
Ontario M1V 4V7
Phone # (416) 291-3953
Email: sales@eliteauto.ca
Web: www.eliteauto.ca (http://www.eliteauto.ca)
I hope people can make use of this info. Quality is excellent...as is turn around.
John.
Your clutch line, is it 44" long? I am looking to replace mine while i change the m/c to fjr.
Haven't measured mine yet but will bee doing it soon
Ken
Quote from: keand3 on February 26, 2013, 01:08:28 PM
Your clutch line, is it 44" long? Ken
:hi: Yes Ken, it is... :good:
John.
Thanks.
Will be replacing my clutch line soon as well :yes:
Ken
Great info, they're only a few minutes from my place. I'm looking at a SS clutch line also.
Were these items off the shelf or did they cut/crimp everything for you?
Often they have them off the self based on standard length, but I would recommend to messure your current line.
Cheers
Ken
Quote from: PaulG on March 28, 2013, 10:13:16 PM
Great info, they're only a few minutes from my place. I'm looking at a SS clutch line also.
Were these items off the shelf or did they cut/crimp everything for you?
:hi: Hey Paul,
They make them up to suit your ride...usually in 24/48 hours from order :good2: I did ALL the brake lines (including Anti-dive!!) and the clutch line to, all for (with HST) a wee bit under $165.00
The guys name is Raymond Chan...nice guy and very helpfull :good:
John.
I ordered lines from this outfit as well. They were very easy to deal with and very quick. I ordered all but the antidive lines as I went to two lines from the master to the calipers on the front. I if I remember my clutch line was 43 in. long and 32 and 33 in. for the brake lines. My lines had an adjustable end on them so I didn't have to worry about the banjo orientation. The prices were very good. Big R. ps I have a 86
What's the easiest way to get ahold of these guys to order some lines? The email address listed is no good...
:hi: Try this email address... raymond@eliteauto.ca
John.
Looks like a great time! Love looking at old vintage stuff!!
The contact info page on that website is not working, nor does the sales@eliteauto email address. :(
Quote from: wirehairs on February 17, 2015, 11:35:45 AM
The contact info page on that website is not working, nor does the sales@eliteauto email address. :(
I went with this outfit:
http://www.rennsportautoparts.com (http://www.rennsportautoparts.com)
Don't bother with the email address on the bottom of the web page. Call them and ask to speak with their person who does the brake lines. His name was Raymond too. May be the same person.
Their prices were very reasonable, even with shipping from Canada.
Thanks. One question though: I kind of prefer to buy the lines from a company who already knows the lengths and banjo connections that I need based on the bike I have (93 FJ1200). The reason why is because of a previous experience where a SS line I ordered ended up being a little long, and those metal ones sure don't bend like the rubber ones do. So, does Renn Auto Parts already have that info for FJ lines?
Thanks!
Quote from: FJ1100mjk on February 17, 2015, 02:27:08 PM
Quote from: wirehairs on February 17, 2015, 11:35:45 AM
The contact info page on that website is not working, nor does the sales@eliteauto email address. :(
I went with this outfit:
http://www.rennsportautoparts.com (http://www.rennsportautoparts.com)
Don't bother with the email address on the bottom of the web page. Call them and ask to speak with their person who does the brake lines. His name was Raymond too. May be the same person.
Their prices were very reasonable, even with shipping from Canada.
Quote from: wirehairs on February 18, 2015, 10:04:10 AM
One question though: So, does Renn Auto Parts already have that info for FJ lines?
Thanks!
You are going to have to contact them about your specific application and concerns.
If they can't supply you with want you require, then you may have to pony up more $ and go with Galfer, Goodridge, or the like.