Print Page - FJ1200 Clutch slave rebuild

Title: FJ1200 Clutch slave rebuild
Post by: Jim_C on September 22, 2012, 02:46:15 PM

Hi Guys. I've to rebuild my clutch slave next week and I seen an excellent photo guide on here somewhere but for the life of me I can't find it now :( Is anyone able to send me a link?

Manyn thanks!

Title: Re: FJ1200 Clutch slave rebuild
Post by: yamaha fj rider on September 22, 2012, 02:52:32 PM

Home page click on "files section" then click on clutch. There you go.

Kurt

Title: Re: FJ1200 Clutch slave rebuild
Post by: Jim_C on September 22, 2012, 03:23:45 PM

Hi Kurt, thanks for that. I seen that one, but there was a post that someone made with step by step photos I was trying to re-find that one.

Regards

Jim

Title: Re: FJ1200 Clutch slave rebuild
Post by: Matt on September 22, 2012, 04:14:25 PM

Hi there

This following link leads to a comprehensive step by step instruction with pictures, however the pictures appear to be dead. I will post it up just in case the images come back...

http://www.bikers1.demon.co.uk/clutchcyl.htm (http://www.bikers1.demon.co.uk/clutchcyl.htm)

Title: Re: FJ1200 Clutch slave rebuild
Post by: Matt on September 24, 2012, 01:35:25 AM

It looks like I need to go down this path too, so I looked harder and found a revised step by step page with pictures.

http://www.bikers1.com/shed/technical/bikers1-fjxjr-clutch-seals/ (http://www.bikers1.com/shed/technical/bikers1-fjxjr-clutch-seals/)

FJowners.com

General Category => Maintenance => Topic started by: Jim_C on September 22, 2012, 02:46:15 PM