Print Page - urethane engine mounts....

Title: urethane engine mounts....
Post by: Antonn3 on July 12, 2012, 08:43:18 PM

Hello,
Im in the process of having some urethane engine mounts made. I know some have replaced the solid upper left engine mount from metal to the rubber ones, but what about the other mounts?
Has any one changed the other mounts to something not as soft? What about the 2 aluminum mounts at the rear of the engine, close to the breather tube?
Change all to urethane?
Your thoughts?
....the bike in question is a '85 FJ

Thanks,
Tony

Title: Re: urethane engine mounts....
Post by: FJmonkey on July 12, 2012, 08:57:48 PM

Check with Randy at RPM before you commit, he is already working on this for the solid mount years... Randy has good stuff for our FJ's...

Title: Re: urethane engine mounts....
Post by: 56 CHEVY on July 12, 2012, 10:16:48 PM

Any news from Randy on the urethane motor mounts he was working on?

Title: Re: urethane engine mounts....
Post by: Antonn3 on July 12, 2012, 11:32:18 PM

FJmonkey , yes I know Randy is working on urethane mounts, but in the mean time, I have the urethane from a left over project. And easy to turn them myself for now, until Randys are available.

Tony

Title: Re: urethane engine mounts....
Post by: racerrad8 on July 13, 2012, 01:20:45 PM

Still testing.

Randy - RPM

FJowners.com

General Category => Modifications => Topic started by: Antonn3 on July 12, 2012, 08:43:18 PM