Text only | Text with Images

FJowners.com

General Category => Maintenance => Topic started by: ELIMINATOR on June 21, 2012, 03:09:21 PM

Title: FJ1200 3CV Front sprocket nut
Post by: ELIMINATOR on June 21, 2012, 03:09:21 PM
Simple question:

What size socket do I need to remove the nut?
Title: Re: FJ1200 3CV Front sprocket nut
Post by: andyb on June 21, 2012, 03:42:34 PM
Had to go look.  36mm.
Title: Re: FJ1200 3CV Front sprocket nut
Post by: ELIMINATOR on June 21, 2012, 05:38:32 PM
Go look?

What did you do, take the cover off?


Or have a look at your sockets, as 36mm is hardly a size supplied in a socket set?
Title: Re: FJ1200 3CV Front sprocket nut
Post by: andyb on June 21, 2012, 05:57:27 PM
Cover was already off.   Just had to see which socket fit :D
Title: Re: FJ1200 3CV Front sprocket nut
Post by: ELIMINATOR on June 21, 2012, 06:13:40 PM
Lucky for me.

let's see then. I would need to buy a 36mm socket and a chain tool. Hmm, see how much a mate would charge who probably has both the bits I would have to buy.

Now I know why my other three bikes are shaft drive.  :good2:
Title: Re: FJ1200 3CV Front sprocket nut
Post by: bcguide on June 22, 2012, 01:06:45 AM
in english 1 and 7/16
Text only | Text with Images