Print Page - size of o-rings in the carbs for the needle and seat

Title: size of o-rings in the carbs for the needle and seat
Post by: loppy on May 13, 2012, 01:50:20 PM

Was wondering if anyone knows the size of the o-rings on the needle and seats in a 89 fj1200? My carbs are leaking out the overflow hoses and i think this is the problem, or the whole units are bad. Thanks

Title: Re: size of o-rings in the carbs for the needle and seat
Post by: RichBaker on May 15, 2012, 12:20:30 AM

All that info is in the FILES section under the appropriate title....

Title: Re: size of o-rings in the carbs for the needle and seat
Post by: andyb on May 15, 2012, 08:04:48 AM

BUT SEARCHING IS HAAAARRRDDD!!!! (http://www.fjowners.com/index.php?topic=1391.0)

Title: Re: size of o-rings in the carbs for the needle and seat
Post by: racerrad8 on May 15, 2012, 10:50:36 AM

Or you can find them, and all of the other o-rings as well as the S/S screw kit here; RPM Carb Kit (http://www.rpmracingca.com/proddetail.asp?prod=carbkit)

Randy - RPM

Title: Re: size of o-rings in the carbs for the needle and seat
Post by: SlowOldGuy on May 15, 2012, 01:40:29 PM

If you're working on the carbs, GET THE KIT!

DavidR.

FJowners.com

General Category => Maintenance => Topic started by: loppy on May 13, 2012, 01:50:20 PM