Print Page - Countershaft sprocket nut torque spec?

Title: Countershaft sprocket nut torque spec?
Post by: TheRadBaron on February 07, 2012, 05:29:16 PM

My manual seems to have left out the torque spec for the 36mm nut that holds the c/s sprocket on. Anyone know what it is? Thanks.

Title: Re: Countershaft sprocket nut torque spec?
Post by: Arnie on February 07, 2012, 05:55:52 PM

According to Clymer - Drive Chain Sprocket Nut 85 N-m, 61Ft/Lbs

Make sure you use the tabbed lock washer on at least 2 flats! I've had this nut loosen itself previously.

Arnie

Title: Re: Countershaft sprocket nut torque spec?
Post by: TheRadBaron on February 07, 2012, 08:11:44 PM

Thanks. Yeah, mine was loose when I took it apart. I blame the PO, though.

FJowners.com

General Category => Maintenance => Topic started by: TheRadBaron on February 07, 2012, 05:29:16 PM