I pulled the tank to inspect my 84. Sure enough my outlet fitting moved very easily. I squeezed it back into proper position and wired it into place. I found out also that when the hose is off fuel drips out the fitting with the hose off and no vacuum from the engine is supplied. Petcock not being available I am wondering what to do. Can the newer petcock be installed in its place or is the newer fuel tank design able to be fitted without changing other items?
Hey Mike, I moved your question out of the Files Section and into this section.
You have a leaky petcock.
3 options: 1) Buy the O rings and spring and rebuild your old one
2) Buy a new petcock. Yes the new oem vacuum petcocks are still available for the 84/85 FJ's.
3) Go to a aftermarket petcock. See Randy @ RPM, he has the Pingel petcocks.
Cheers! Pat
They are available they just cost alot. Yours is the 2nd most expensive one. :dash1:
86-87 are alot more but priceless if it keeps your bike from catching on fire. Feel free to chime in Dan.
89 later are cheap.
Bob W
Quote from: weymouth399 on September 07, 2011, 10:44:56 AM
Feel free to chime in Dan.
Because it's all been said already, I'll say only this:
http://www.fjowners.com/index.php?topic=786.msg5992#msg5992 (http://www.fjowners.com/index.php?topic=786.msg5992#msg5992)
A bit more detail here:
http://www.fjowners.com/index.php?topic=484.msg3637#msg3637 (http://www.fjowners.com/index.php?topic=484.msg3637#msg3637)
Dan
My local Yamaha Dealer said the assembly was discontinued. Ill check with Kawasaki on the pieces to repair.
$117 available at Boats.net