Text only | Text with Images

FJowners.com

General Category => Yamaha FJ1100 / FJ1200 Running Problems => Topic started by: irishluck on September 05, 2011, 01:45:15 PM

Title: quick noob question about ignitor
Post by: irishluck on September 05, 2011, 01:45:15 PM
where does the vacuum hose from the ignitor on the 87 fj1200 go?

I cant figure it out and cant member where it goes :dash1:
Title: Re: quick noob question about ignitor
Post by: racerman_27410 on September 05, 2011, 02:19:57 PM
number one port on the carb joint. right next to the hose on the number 2 carb joint that goes to the fuel petcock.

KOokaloo!
Title: Re: quick noob question about ignitor
Post by: irishluck on September 05, 2011, 02:29:21 PM
Quote from: racerman_27410 on September 05, 2011, 02:19:57 PM
number one port on the carb joint. right next to the hose on the number 2 carb joint that goes to the fuel petcock.

KOokaloo!

Now i have an aftermarket fuel petcock that doesnt have a vacuum port to the #2 port on the carb joints, is that going to hurt anything?
Title: Re: quick noob question about ignitor
Post by: Travis398 on September 05, 2011, 03:08:45 PM
it will if you don't plug the hole.
Title: Re: quick noob question about ignitor
Post by: irishluck on September 05, 2011, 03:40:55 PM
Quote from: Travis398 on September 05, 2011, 03:08:45 PM
it will if you don't plug the hole.

understandable

thanks!
Text only | Text with Images