I was noticing that this rubber piece/o-ring at the steering stem nut was getting dried and cracked. When I touched it to try to determine if it was some sort of seal or what it was, it came off. From the lack of paint under where the ring was (pic #2) I'm assuming it's a oem piece, but it doesn't show up on the parts schematic. Anyone know what this rubber piece is and what it's function (if any) is??
(http://fjowners.com/gallery/2/150_14_04_11_6_17_30_0.jpeg)
(http://fjowners.com/gallery/2/150_14_04_11_6_17_34_1.jpeg)
I don't think my bike has one of them, but now you are making feel like I should go look.
None of my FJs have that either.
Quote from: markmartin on April 14, 2011, 07:30:32 PM
I was noticing that this rubber piece/o-ring at the steering stem nut was getting dried and cracked. When I touched it to try to determine if it was some sort of seal or what it was, it came off. From the lack of paint under where the ring was (pic #2) I'm assuming it's a oem piece, but it doesn't show up on the parts schematic. Anyone know what this rubber piece is and what it's function (if any) is??
(http://fjowners.com/gallery/2/150_14_04_11_6_17_30_0.jpeg)
(http://fjowners.com/gallery/2/150_14_04_11_6_17_34_1.jpeg)
Blame it on the PO....The bastard!!!!!!
None of the 3 FJs I've had (86, 89 & 92) have ever had that either...nor can I remember seeing one on other FJs. :unknown:
I guess Mark's stem made it through uncut.
I wonder if its part #5 here:
http://www.boats.net/parts/search/Yamaha/motorcycle/1991/FJ1200B/STEERING/parts.html (http://www.boats.net/parts/search/Yamaha/motorcycle/1991/FJ1200B/STEERING/parts.html)
Mine was in the wrong place when I bought it (as I found out when I did the front end swap). Its in the right place now.
Harvy
Quote from: carsick on April 14, 2011, 11:17:20 PM
I guess Mark's stem made it through uncut.
I'm still not sure what the piece is, but when you put it that way, I feel lucky.
Quote from: Harvy on April 14, 2011, 11:22:28 PM
I wonder if its part #5 here:
http://www.boats.net/parts/search/Yamaha/motorcycle/1991/FJ1200B/STEERING/parts.html (http://www.boats.net/parts/search/Yamaha/motorcycle/1991/FJ1200B/STEERING/parts.html)
Mine was in the wrong place when I bought it (as I found out when I did the front end swap). Its in the right place now.
Harvy
Harvy, is #5 --Washer Plate---in the schematic, made of rubber?
Sure is Mark