In the process of rebuilding my forks and need a replacement right side fork slider for my '92. I have a dent on the outside that is preventing the fork tube to move freely inside, didn't notice this when I bought of course. The Yamaha part number is 3XW-23136-00-00 Was also wondering if an earlier model slider may work like from an '89 - '90 without the anti-dive if I don't have any success finding one for a 3XW, but then the locating screw may get in the way, etc. Very hard part to find new or used. :dash1:
Thanks for any help!
Do you have a pic.
Depending on how deep your dent is you might be able to grind clearance into it. Just a thought.
Your going to have trouble finding someone that will split a pair up.
You may have to buy both, there was some 89 on flebay a week or two ago. cheap
Bob W
It's # 20 in the pic. It may be repairable, the trouble is getting down inside as it's almost near the bottom right in center of the tube. I will post a pic of the actual shortly.
http://img715.imageshack.us/img715/4629/frontfork.png (http://img715.imageshack.us/img715/4629/frontfork.png)