Anyone ever had to replace the side stand? Mine looks to be a little worn at the pivot area and it seems as if it's welded to the frame. Any solutions? It seems that my FJ leans a little too far and I'm afraid of it falling over. Of course I can use the center stand, but that's a PIA every time I stop somewhere.
I replaced mine a couple years ago.... it was worn in the pivot. Dragging on the shifter every downshift and loose and rattly. New stand got rid of all the issues... :gamer:
Process? Did you just grind off the old one and weld on the new? Easy as that? Remember price of stand?
Bob,
It's bolted on. No need for an angle grinder.
You can also just shim the pivot to take out the slop.
See the XPD here: http://tinyurl.com/2deve2z (http://tinyurl.com/2deve2z)
Cheers,
Arnie
The slop is from the steel wearing down over time. I have actually had some success from creating a plastic "Washer" that is slotted to fit the "rounded rectangle" profile to take up some of the space. The smoothness of the washer creates a bushing of sorts. Depending on the plastic used - it will last for years.
I like Rich's idea of getting a new kickstand better though. I'll have to price that out...
I didn't do anything to the frame lug, it appears to be harder, all or most of the wear was in the pivot hole in the stand.... I was considering modifying the hole by adding a wrist pin bearing from a 2-smoke, but didn't. For most of a year I tried shimming and washers and such, nothing worked well for very long... bought the new stand and I'm MUCH happier.
Quote from: Marsh White on September 17, 2010, 09:42:32 PM
The slop is from the steel wearing down over time. I have actually had some success from creating a plastic "Washer" that is slotted to fit the "rounded rectangle" profile to take up some of the space. The smoothness of the washer creates a bushing of sorts. Depending on the plastic used - it will last for years.
I like Rich's idea of getting a new kickstand better though. I'll have to price that out...
Would be tempted to consider this and rebush the stand with bronze, should last near forever then.
Quote from: Marsh White on September 17, 2010, 09:42:32 PM
The slop is from the steel wearing down over time. I have actually had some success from creating a plastic "Washer" that is slotted to fit the "rounded rectangle" profile to take up some of the space. The smoothness of the washer creates a bushing of sorts. Depending on the plastic used - it will last for years.
I understand making a washer. But what do you mean about it being "slotted"? I have access to some very durable and machinable nylon. Maybe that would work for now. Any photos of said washer setup?
Quote from: Marsh White on September 17, 2010, 09:42:32 PM
I like Rich's idea of getting a new kickstand better though. I'll have to price that out...
Marsh, Rich and others, don't get a new sidestand just yet.
Wait for a bit.
Not to drop names, but... A guy we know as "the hippie" is gonna come up with some uber-cool extended sidestands (+1.5") for our raised FJ's.
Retention of the oem sidestand switch will be retained.
Stay tuned. Hang loose (get it?) This is gonna be worth the wait.
Lord, please grant me patience.....but please hurry.
Yes please Pat..........its sometimes not easy to find a block of wood to put under it..... :dash2: :wacko2: :wacko1:
Harvy
Quote from: Pat Conlon on September 22, 2010, 08:14:47 PM
Quote from: Marsh White on September 17, 2010, 09:42:32 PM
I like Rich's idea of getting a new kickstand better though. I'll have to price that out...
Marsh, Rich and others, don't get a new sidestand just yet.
Wait for a bit.
Not to drop names, but... A guy we know as "the hippie" is gonna come up with some uber-cool extended sidestands (+1.5") for our raised FJ's.
Retention of the oem sidestand switch will be retained.
Stay tuned. Hang loose (get it?) This is gonna be worth the wait.
Gosh, if that was adjustable both ways it'd also help the drag guys too.... :)
Quote from: Pat Conlon on September 22, 2010, 08:14:47 PM
Quote from: Marsh White on September 17, 2010, 09:42:32 PM
I like Rich's idea of getting a new kickstand better though. I'll have to price that out...
Marsh, Rich and others, don't get a new sidestand just yet.
Wait for a bit.
Not to drop names, but... A guy we know as "the hippie" is gonna come up with some uber-cool extended sidestands (+1.5") for our raised FJ's.
Retention of the oem sidestand switch will be retained.
Stay tuned. Hang loose (get it?) This is gonna be worth the wait.
It's 3 or 4 years too late for me, Paddy..... :drinks:
QuoteMarsh, Rich and others, don't get a new sidestand just yet.
Wait for a bit.
Not to drop names, but... A guy we know as "the hippie" is gonna come up with some uber-cool extended sidestands (+1.5") for our raised FJ's.
Retention of the oem sidestand switch will be retained.
Stay tuned. Hang loose (get it?) This is gonna be worth the wait.
Any update? :unknown: I'm getting tired of carrying a block of wood in my tank bag everywhere I go. Plus it's embarrassing. :rofl2:
Sorry Bob, I forgot all about this....I just fired off a e-mail. I'll put this on my calendar to assure that I follow up. Pat
Quote from: Scooterbob on November 19, 2010, 08:17:48 AM
Any update? :unknown: I'm getting tired of carrying a block of wood in my tank bag everywhere I go. Plus it's embarrassing. :rofl2:
Much appreciated Amigo! :hi:
Quote from: Pat Conlon on September 22, 2010, 08:14:47 PM
Quote from: Marsh White on September 17, 2010, 09:42:32 PM
I like Rich's idea of getting a new kickstand better though. I'll have to price that out...
Marsh, Rich and others, don't get a new sidestand just yet.
Wait for a bit.
Not to drop names, but... A guy we know as "the hippie" is gonna come up with some uber-cool extended sidestands (+1.5") for our raised FJ's.
Retention of the oem sidestand switch will be retained.
Stay tuned. Hang loose (get it?) This is gonna be worth the wait.
Any update on extended sidestands?
Quote from: FeralRdr on June 22, 2011, 12:49:21 PM
Quote from: Pat Conlon on September 22, 2010, 08:14:47 PM
Quote from: Marsh White on September 17, 2010, 09:42:32 PM
I like Rich's idea of getting a new kickstand better though. I'll have to price that out...
Marsh, Rich and others, don't get a new sidestand just yet.
Wait for a bit.
Not to drop names, but... A guy we know as "the hippie" is gonna come up with some uber-cool extended sidestands (+1.5") for our raised FJ's.
Retention of the oem sidestand switch will be retained.
Stay tuned. Hang loose (get it?) This is gonna be worth the wait.
Any update on extended sidestands?
I know Pat had his installed...
Randy - RPM
I'm still patiently waiting............. (popcorn)
Hey guys, I have Jon Cain's sidestand pad extension and it works great. Adjustable and reversible, very cool.
I'll take some picts tomorrow and do a write up. Sorry for the delay. Cheers! Paddy
Here ya go Bob, sorry it took so long: http://www.fjowners.com/index.php?topic=4325.0 (http://www.fjowners.com/index.php?topic=4325.0)
Awesome info Pat. I had already had an idea similar to this one. Just didn't develop it as far as adding the aluminum. Nice touch. :good:
I will begin making mine today.