Print Page - Front Steel braided brake lines

Title: Front Steel braided brake lines
Post by: 1tinindian on July 09, 2010, 09:18:29 AM

I have the FZ6 master and R6 bluedots, is there any reason why I couldn't just order lines for a FZ6, 2 line set, to fit the FJ?
This would ensure I got the correct ends on the lines verses custom ordering to fit.

Thanks,

Leon

Title: Re: Front Steel braided brake lines
Post by: andyb on July 09, 2010, 09:21:40 AM

Fork length the same? Bar width the same? Same steering lock distance, depending on the routing? Same bar to clamp distances?

Yer dime, mate. You could call them up and ask what the lengths are like perhaps though....

Title: Re: Front Steel braided brake lines
Post by: SILVERGOAT on July 10, 2010, 09:22:08 AM

I have an '05 FZ1 master cylinder and calipers and Goodridge steel braided lines for the FZ1 on my 89 with no problems. Just make sure all the attaching points at the calipers and master cylinder are the same orientation between the R6 and FZ6. You CAN NOT twist steel braided lines to make them fit.

FJowners.com

General Category => Modifications => Topic started by: 1tinindian on July 09, 2010, 09:18:29 AM