FJowners.com

General Category => Maintenance => Topic started by: twood1972 on September 18, 2022, 06:44:50 PM

Title: Can't find this part
Post by: twood1972 on September 18, 2022, 06:44:50 PM
Lost this morning. Can find left side all day, no luck on right side. Do any of my FJ brothers have an idea as to where I can purchase this part? In the diagram its labeled #44.
Thanks!
Title: Re: Can't find this part
Post by: Bones on September 18, 2022, 07:42:51 PM
http://rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87R%2FSProtector (http://rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87R%2FSProtector)

Is this the part your looking for?
Title: Re: Can't find this part
Post by: twood1972 on September 18, 2022, 08:46:14 PM
Amazing!! After 2 hours of scouring the net, all I could find was left side. You have made my evening! Will be placing the order.
Thanks again.
Title: Re: Can't find this part
Post by: Old Rider on September 19, 2022, 09:33:20 AM
I have also lost this but on the left side i have secured them so they don't get totally gone if lucky
Title: Re: Can't find this part
Post by: Pat Conlon on September 19, 2022, 07:35:53 PM
This reminds me....safety wire your fuel petcock elbow....that is all....carry on....
Title: Re: Can't find this part
Post by: chiz on September 20, 2022, 07:52:29 AM
Make them out of wood seal well and paint time no expense.. me poor so have to make do.
Title: Re: Can't find this part
Post by: ribbert on September 20, 2022, 08:01:09 AM
Quote from: twood1972 on September 18, 2022, 08:46:14 PM
Amazing!! After 2 hours of scouring the net, all I could find was left side. You have made my evening! Will be placing the order.
Thanks again.

...now stick it on so you don't lose it. Heavy duty Velcro dots work well (so they can be removed if need be)

(https://live.staticflickr.com/2894/12304308414_a58e18f16e_c.jpg)

Noel
Title: Re: Can't find this part
Post by: melloncollie on September 20, 2022, 11:36:31 AM
Quote from: ribbert on September 20, 2022, 08:01:09 AM

...now stick it on so you don't lose it. Heavy duty Velcro dots work well (so they can be removed if need be)

(https://live.staticflickr.com/2894/12304308414_a58e18f16e_c.jpg)

Noel

THATS the solution I've been looking for.  I didn't know what it was but I knew I'd recognize it if I saw it.  This one seems to tick all the boxes for me, thanks Noel.
Title: Re: Can't find this part
Post by: twood1972 on September 20, 2022, 10:03:15 PM
I made one out of a thick piece high density plastic that I saved from a project just in case it would come in handy.
I did order a new one but wont be here till Saturday.