Hi all, i've been told a fazer top yoke will go onto my fj1200 1990 so I can put a set of flat bars on. Can anyone tell me their knowledge on this please, what size fazer? what year and is there any mods required to the fazer top yoke to make it fit??
Many thanks Ian
Two things to check:
the diameter of the forks
the spacing between the forks
look at fork seal diameter for both if same it is the same
look at the manufactures of fork braces, if they are the same for both bike...great.. if not then... a no go
May want to look at the offset also, while you're measuring.
If by "fazer" you mean first generatio FZ1, then yes it will bolt up, BUT the FZ1 forks are 43mm vice the FJ 41mm forks. I'll leave it to you on how you go about making up that difference. Any quality job to correct that (besides fitting the FZ1 forks!!!) is liable to be more work, effort, and time than coming up with an alternate solution using the FJ top yoke or having a custom one fabricated.
Also, the FZ1 top yoke rubber mounted the handle bar risers - during aggressive countersteering you can FEEL the bars move in relation to the yoke! Feels very not right! You can press out the rubber bushings and fab some solid ones (I used aluminum), but again, you start getting into more time and $$ than some other solutions.
Chris
Hi what years is a first generation fz1 from and until?
Many thanks for the info Ian
01 to 05 =G1 06 and later are G2 with inverted forks
I am not sure but I think the fork centers are wider on the FZ than on the FJ
Quote from: tqmx1 on May 20, 2010, 04:23:59 PM
01 to 05 =G1 06 and later are G2 with inverted forks
I am not sure but I think the fork centers are wider on the FZ than on the FJ
Nope the first gen FZ1's are the same as the FJ. I bored my 91 FJ tripple clamps and risers and slid an entire 2002 FZ1 front end in works a charm......
(http://i662.photobucket.com/albums/uu349/Yamifj1200/036.jpg)
(http://i662.photobucket.com/albums/uu349/Yamifj1200/IMG_0801.jpg)
Eric M
...and I'll say it again....Hot Damn that's a good looking bike. Makes me want to go get my polishing rag...... Kudos Eric!
Quote from: Yamifj1200 on May 20, 2010, 05:05:04 PM
(http://i662.photobucket.com/albums/uu349/Yamifj1200/IMG_0801.jpg)
Eric M
Your too kind Pat, I'm not in the same league as you but I try to keep up the best I can. Not too bad for a tad over 107,000 miles.
Eric M
That bike is now my poster child. What a beaut'
(I am working on reassembling a 1986)
A Fazer is NOT an FZ1..... it is the little bro to the VMAX.http://autos.groups.yahoo.com/group/fzxfazer/ (http://autos.groups.yahoo.com/group/fzxfazer/)
(http://xa.yimg.com/kq/groups/5736661/homepage/name/566170?type=sn)
Quote from: RichBaker on May 21, 2010, 06:36:39 PM
A Fazer is NOT an FZ1..... it is the little bro to the VMAX.
Actually Rich - in Europe they call the FZ6 and FZ1 both with the name Fazer. I remember at the very first West Coast Rally that Jeff Hoffman rode his FZ1 across the country to join us and had put European "Fazer" stickers on it cuz he thought they looked cool.
They still call it the Fazer in Europe: http://www.yamaha-motor-europe.com/products/motorcycles/fz_series/fz1_fazer.jsp (http://www.yamaha-motor-europe.com/products/motorcycles/fz_series/fz1_fazer.jsp)
Remember - we are an International group here! :good2:
P.S. - I like the white and blue two tone:
(http://www.yamaha-motor-europe.com/Images/2010-yamaha-FZ1-FAZER_DPBMX_detail_006_prv_tcm26-326141.jpg)
Lets not forget the 98-03 YZF600 based FZS fazer...
(http://motoprofi.com/imgs/a/a/d/v/o/yamaha_fzs_600_fazer_1999_6_lgw.jpg)
the top yoke from 1988 FZR1000 modified on my 1985 FJ1100
(http://i41.photobucket.com/albums/e299/ccsct203/017.jpg)