:dash2: I know I've read that carbs etc are in pinned but I can't find them!!
Have a fj based chopper/hard tail that bogs out at higher revs..it's on pod filters so suspect it's jetting issues
What's you guys recommend for standard engine on pod filters atm it's got 135 mains and top notch on needle.
I feel these could be a tad too large , I've also read about spacers for needles.. what sizes would those be??
Many thanks
Most of that type info is in the "Files" section
This should be the carby part of the files...
http://www.fjowners.com/index.php?board=21.0 (http://www.fjowners.com/index.php?board=21.0)