Print Page - How to remove the rotor 8mm hex bolt froma dyna 2000 ignition

Title: How to remove the rotor 8mm hex bolt froma dyna 2000 ignition
Post by: mtc on June 22, 2020, 01:45:04 PM

i tried the broom thing but it crushes the chain guard, and skrims, i have an impact battery drill, will that work?, it's on there tight

Title: Re: How to remove the rotor 8mm hex bolt froma dyna 2000 ignition
Post by: mtc on June 22, 2020, 06:09:27 PM

Quote from: mtc on June 22, 2020, 01:45:04 PM
i tried the broom thing but it crushes the chain guard, and skrims, i have an impact battery drill, will that work?, it's on there tight

never mind, short 18" 2x4 jammed to the read brake caliper, 8mm 3/8 drive to 1/2 breaker bar, that sucker was torque to maybe 70 ft lb, not 35, any how it came off, thanes Pat again

FJowners.com

General Category => Yamaha FJ1100 / FJ1200 Running Problems => Topic started by: mtc on June 22, 2020, 01:45:04 PM