I saw somewhere on here (can't find it again) where somebody replaced their diaphrams and cut the top plastic ring and used a thin washer and a c-clip. Was that successful? If so, how thick of a washer?
Here is the thread:
http://www.fjowners.com/index.php?topic=5340.0 (http://www.fjowners.com/index.php?topic=5340.0)
The conclusion was that they don't let the slides go all the way up.
Quote from: Waiex191 on May 27, 2020, 08:23:07 AM
Here is the thread:
http://www.fjowners.com/index.php?topic=5340.0 (http://www.fjowners.com/index.php?topic=5340.0)
The conclusion was that they don't let the slides go all the way up.
Because of the material.. so I take it they can't be ordered of the same material then? Reason im wondering is cause I have another set of carbs in pretty rough shape except the diaphrams look new. I guess I was more interested in if the c- clip and washer would hold the rubber in place well enough and seal properly