Print Page - Standard exhausts

Title: Standard exhausts
Post by: Swenglish on May 26, 2020, 08:24:23 AM

Hi All

I am in the process of registering my 1988 CV in Switzerland. They do not like modifications here so my 'Future' cans have to go! To be honest I prefer a quieter bike and not to listen to baffleless bikes roaring around :good:.

So, I will have to source a pair of originals (used).

Does anyone know which exhausts will fit a CV? Is it just the ones marked CV or from any other models?

Many thanks

Jeremy

Title: Re: Standard exhausts
Post by: aviationfred on May 26, 2020, 05:05:52 PM

You will need 3CV specific mufflers. All others have the mounting tabs too much forward.

If you can not get an OEM set, you might try these.

https://www.ebay.com/itm/293019227254 (https://www.ebay.com/itm/293019227254)

Fred

Fred

Title: Re: Standard exhausts
Post by: Swenglish on May 27, 2020, 05:27:43 AM

Thanks Fred, you have saved me a lot of aggro.

Title: Re: Standard exhausts
Post by: jono on June 10, 2020, 12:40:34 AM

check these out they look pretty original' https://www.ebay.com/itm/Silencers-Silencer-Exhaust-Silencers-Sito-Yamaha-FJ-1200-from-1991-1335/323912378347?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649' (https://www.ebay.com/itm/Silencers-Silencer-Exhaust-Silencers-Sito-Yamaha-FJ-1200-from-1991-1335/323912378347?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649')

Title: Re: Standard exhausts
Post by: balky1 on June 10, 2020, 08:01:56 AM

Marving makes mufflers with ECE certification. I think Sito also.

Title: Re: Standard exhausts
Post by: Swenglish on June 12, 2020, 01:50:38 PM

Thanks guys!

FJowners.com

General Category => Modifications => Topic started by: Swenglish on May 26, 2020, 08:24:23 AM