Text only | Text with Images

FJowners.com

General Category => Modifications => Topic started by: Firecop119 on April 04, 2020, 01:33:18 PM

Title: Grip install
Post by: Firecop119 on April 04, 2020, 01:33:18 PM
Hello all. I'm trying to install new aftermarket grips on my 92 and on the throttle side there is a lot of slop now seems like on the cables. Just feels loose all together. Was thinking this should have been an easy job. Anyone ever run into this kind of problem. Thanks.
Title: Re: Grip install
Post by: JPaganel on April 04, 2020, 04:12:49 PM
Are you installing the grip on the original throttle tube? Or is your grip the type with new tube built in?
Title: Re: Grip install
Post by: Firecop119 on April 04, 2020, 07:13:00 PM
I'm replacing with ones that have the tube built in.
Title: Re: Grip install
Post by: racerrad8 on April 04, 2020, 08:17:38 PM
Quote from: Firecop119 on April 04, 2020, 07:13:00 PM
I'm replacing with ones that have the tube built in.

Are they the proper bar diameter and cable spacing?

Randy - RPM
Title: Re: Grip install
Post by: Firecop119 on April 05, 2020, 08:36:28 AM
I bought these off eBay and they say they fit an FJ. I know the bar size is ok but the diameter of where the cables hook up might be a hair smaller. Would I just need to adjust the cable tension?
Text only | Text with Images