FJ Owners,
I recently picked up a donor '93 FJ1200 in Tennessee. The bike was wrecked & totaled by the Insurance Co. This '93 has supplied a few important replacements/spares for my '86 but there are many items that are either non-compatible with my '86 or I really don't need. I'd also like to re-coop a bit of my out-of-pocket to buy additional items my '86 needs (i.e new SS Brake Lines from RPM). It will also get the bride off my butt :yahoo:
I will describe the items to the best of my ability and not falsify anything. I've a good bit of experience with restoring bikes so I have some idea what these things are worth, but I'm generally going to ask about half what I see folks asking for on Evil-Bay. If you think the price I'm asking far out-of-line, tell me why & make a different offer. Maybe we can reach an agreement.
As I strip the parts I'll keep adding them to this listing, as required by the board I will post when something is sold...... Here Goes:
1993 Mikuni Carb Set - Look absolutely beautiful, the best piece on this donor bike. Probably need a little cleaning (I would) but these appear to have been professionally rebuilt and probably installed very recently before the crash. I see absolutely nothing broken not even a messed up screw head. Insides look clean as a whistle....(but again a little wash wouldn't hurt). $225 +ACTUAL Shipping. I'll send them overseas if requested. I'll send more photos of any part of them you like.... Send a PM.
(https://i.postimg.cc/zBdhxNzH/DONOR93-Carbs-3.jpg) (https://postimg.cc/9R7zfvqc)
(https://i.postimg.cc/Hk5QdF2F/DONOR93-Carbs-5.jpg) (https://postimg.cc/ZWb9L7XL)
1993 Ignitor TD14-90 A - With Front Harness, All Relays & Boost Sensor All the connectors are good (none broken), no frayed, no modified, or broken wires. Yamaha Part # 4CR-82580-00 on the harness. $100 +ACTUAL Shipping.
(https://i.postimg.cc/kgmpGY6G/93-Front-Harness-TD14-90.jpg) (https://postimg.cc/bsmTFTRf)
1993 Front Fender - Heat damage on Rear Section All Tabs Good - The fender has some scratches in the front and rear sections, Heat Damage to the rear. All Mounting tabs intact but I see a small crack developing in the left tab of the rear section, looks like the PO put a dab of superglue on it but it is solid. I have no idea what to ask for this (although I know I pad far too much for the one I got from Europe). If I hadn't bought that one this would be on my bike. Please just make an offer....
As I pull stuff off that is good and serviceable I'll post it up. If there is something you need from a '93 ask.... I might have it...
Sincerely,
Kurt
Transmission? Output shaft assembly is what I need.
Quote from: FJ1200W on April 02, 2020, 02:06:23 PM
Transmission? Output shaft assembly is what I need.
In fact, the transmission and shift forks would be ideal.
Quote from: FJ1200W on April 02, 2020, 06:20:52 PM
Quote from: FJ1200W on April 02, 2020, 02:06:23 PM
Transmission? Output shaft assembly is what I need.
In fact, the transmission and shift forks would be ideal.
Skip the forks, I'd go new on those.
Gear sets - :D
FJ Owners,
Just wanted to provide an update and post a couple final items. It turns out the donor bike is going to keep several other bikes on the road and/or replace missing or broken items for a couple guys. Although it was a PITA driving ~250 miles (ONE WAY) to get this wrecked piglet, then tearing it all down and tossing much of it in the trash. I've pretty much covered my time & expenses and have the chin spoiler I was really after.
Obviously, I'm new to the FJ community with the majority of my bikes and experience being the XS1100's, and the XJ series. However, I am familiar with some of the various parts that are hard to find and sometimes keep a bike parked. I also like defraying the cost of my hobby a little as well..... also keeps the wife happy as she sees a
LITTLE coming back into the accounts - LOL
SOLD ITEMS:
- Front Forks - Somewhere in Canada
- Instrument Cluster - Also Somewhere in Canada
- Front Fender - Australia
- Full Transmission - Missouri
- Carbs - Missouri
- Body Side Covers - Georgia
- Misc. Brake Lamp Parts - Kansas
Although much of this bike went to the metal recycle center (frame, cylinders, rims, damaged upper case) there are a few items I retained that I assume would be of value to some.
Still Available Parts For Sale
- ECM w/Harness and all relays, boost sensor, etc. - $100 + Ship FIRM Kinda surprised no one wanted a spare ECM....
- Full Wiring Harness - Previous Owner modified the horn wires & generator plug otherwise all connectors and wiring good. $50+Ship OR MakeOffer.
- ABS System - Motor/Pump, F&R Sensors, Control Unit - $100+ Ship OR MakeOffer
- Fuel Tank - THe tank has a couple dings in it and will need a little body work. I'm considering keeping it and fixing it as a spare for myself. Unfortunately, I'm not sure if there is a way to incorporate a vacuum petcock on this later model tank. If anyone knows of a way, please let me know. It is dinged up but my experience with old Yamahas is that tanks tend to be really hard to come by so having a spare for myself seems a wiser move than selling it. If someone wants it, $100 + ship will certainly persuade me to let it go.
- Other misc. parts: Front Rotors, Clutch, Ignition Pick-Up, Trees & Bars, Etc. - Ask - Although the remains are limited, I may have it.
(https://i.postimg.cc/kD3LTzGf/FJ-93-ECMHarness.jpg) (https://postimg.cc/9wbxMxG7)
(https://i.postimg.cc/cHzpnrSq/FJ-93-ABS.jpg) (https://postimg.cc/k6xYrMGw)
(https://i.postimg.cc/kGtkFqJ2/FJ-93-Main-Harness.jpg) (https://postimg.cc/GTd7b0sR)
(https://i.postimg.cc/fyLb4JLY/FJ1200-93-Tank-2-L.jpg) (https://postimg.cc/47DGV4p3)