Hi everyone, in February I bought an entire 1986 FJ 1200 for the purpose of using the
rolling chassis for my custom project bike. I have removed almost all of the components
that I will not be using. The "kid".....actually SQUID said he last rode the bike in November 2016.
So, as you can imagine, it is a complete bike. I have parts that may help you with your project.
Ignition, complete wiring harness, complete set of carbs, motor that could be used for parts or fixed.
Complete stock exhaust system, hand controls, ignition switch w/key, Givi luggage rack to mount hard box.
I'm obviously keeping the items that are vital to my project (frame, swing arm, front end, fuel tank etc.) The
rest needs to help other FJ owners. If you have a specific need, send me a message and we can see if I can help.
Thanks for reading.
Quote from: FJ-Heretic on September 30, 2017, 04:46:55 PM
Hi everyone, in February I bought an entire 1986 FJ 1200 for the purpose of using the
rolling chassis for my custom project bike. I have removed almost all of the components
that I will not be using. The "kid".....actually SQUID said he last rode the bike in November 2016.
So, as you can imagine, it is a complete bike. I have parts that may help you with your project.
Ignition, complete wiring harness, complete set of carbs, motor that could be used for parts or fixed.
Complete stock exhaust system, hand controls, ignition switch w/key, Givi luggage rack to mount hard box.
I'm obviously keeping the items that are vital to my project (frame, swing arm, front end, fuel tank etc.) The
rest needs to help other FJ owners. If you have a specific need, send me a message and we can see if I can help.
Thanks for reading.
Do you have the lower bellpan to sell? Thnx
what would you take for the carb set shipped to 78015?
Quote from: FJ-Heretic on September 30, 2017, 04:46:55 PM
Givi luggage rack to mount hard box.
Thanks for reading.
Is this just the rear rack or is it the complete Wingrack set up that side cases can be attached?
Fred
Hey guys, sorry for the delay. I was busy for a couple of weeks and then I left for Scotland for 2 weeks and just got back home.
LAZERCOBRA: Bellypan is junk! sorry
RETCOL: Give me a chance to see what USPS would cost. They are the cheapest means for shipping.
AVIATIONFRED: The Givi is just for mounting a top box, no side luggage hardware. Thanks FJ-H
When you say hand controls, are you referring to turn signal switches, ect? If so, do you know if they would fit an 85 fj1100?
'86 is second generation, hand controls are different.
Quote from: retcol on October 10, 2017, 09:48:52 PM
what would you take for the carb set shipped to 78015?
I just got a quote from USPS. $27.80 to ship from my zip to yours. For round numbers and reasonable price
how about $122.20 for the carbs + $27.80 for shipping for a grand total of $150.00. If you're interested, you could PM me
and we can make arrangements. Thanks for inquiring. FJ-H
Looking for a couple of things to complete my bike the way it ways when i first saw it on the showroom floor. Need left and right air scoops and the black beauty covers that cover the mounting screws. Really only need right side but will take both sides just because. Thanks
Quote from: 86 the cool ride on February 12, 2018, 06:03:02 PM
Looking for a couple of things to complete my bike the way it ways when i first saw it on the showroom floor. Need left and right air scoops and the black beauty covers that cover the mounting screws. Really only need right side but will take both sides just because. Thanks
If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.
Quote from: FJ1100mjk on February 12, 2018, 06:36:08 PM
Quote from: 86 the cool ride on February 12, 2018, 06:03:02 PM
... and the black beauty covers that cover the mounting screws. Really only need right side but will take both sides just because. Thanks
If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.
And if Marty doesn't have what you need, the fairing screw covers are available brand new at
RPM (http://www.rpmracingca.com/) .
86-87 Left Side Fairing Protector 1 (http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87L%2FSProtector)
86-87 Right Side Fairing Protector 2 (http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87R%2FSProtector)
Randy -
RPM (http://www.rpmracingca.com/)
Quote from: racerrad8 on February 13, 2018, 11:51:18 AM
Quote from: FJ1100mjk on February 12, 2018, 06:36:08 PM
If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.
And if Marty doesn't have what you need, the fairing screw covers are available brand new at RPM (http://www.rpmracingca.com/) .
86-87 Left Side Fairing Protector 1 (http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87L%2FSProtector)
86-87 Right Side Fairing Protector 2 (http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87R%2FSProtector)
Randy - RPM (http://www.rpmracingca.com/)
As I stated, I have the items. I can also beat RPM prices. :lol:
Quote from: FJ1100mjk on February 13, 2018, 12:39:15 PM
Quote from: racerrad8 on February 13, 2018, 11:51:18 AM
Quote from: FJ1100mjk on February 12, 2018, 06:36:08 PM
If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.
And if Marty doesn't have what you need, the fairing screw covers are available brand new at RPM (http://www.rpmracingca.com/) .
86-87 Left Side Fairing Protector 1 (http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87L%2FSProtector)
86-87 Right Side Fairing Protector 2 (http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87R%2FSProtector)
Randy - RPM (http://www.rpmracingca.com/)
As I stated, I have the items. I can also beat RPM prices. :lol:
Yes, I am sure you can beat the price...
but he is looking for
showroom quality as the day when he first laid eyes on his FJ in the showroom... :bomb:
Randy - RPM
Quote from: racerrad8 on February 13, 2018, 01:56:18 PM
Quote from: FJ1100mjk on February 13, 2018, 12:39:15 PM
As I stated, I have the items. I can also beat RPM prices. :lol:
Yes, I am sure you can beat the price...
but he is looking for showroom quality as the day when he first laid eyes on his FJ in the showroom... :bomb:
Randy - RPM
Touche' :flag_of_truce:
Hi, came across this post and realize it's been out there a while. I'm looking for a VG to excellent right side panel (the one between the fair in tank for my '86 FJ. Have you got one? if so, what do you want for it? Also could you post a picture. Thanks! :crazy:
Is it possible that you might have a complete airbox? I know this is an old post, but I am on the hunt for my '84 Fj1100 to go back to stock.
Quote from: FJ-Heretic on September 30, 2017, 04:46:55 PM
Hi everyone, in February I bought an entire 1986 FJ 1200 for the purpose of using the
rolling chassis for my custom project bike. I have removed almost all of the components
that I will not be using. The "kid".....actually SQUID said he last rode the bike in November 2016.
So, as you can imagine, it is a complete bike. I have parts that may help you with your project.
Ignition, complete wiring harness, complete set of carbs, motor that could be used for parts or fixed.
Complete stock exhaust system, hand controls, ignition switch w/key, Givi luggage rack to mount hard box.
I'm obviously keeping the items that are vital to my project (frame, swing arm, front end, fuel tank etc.) The
rest needs to help other FJ owners. If you have a specific need, send me a message and we can see if I can help.
Thanks for reading.
Hi interested in luggage rack and belly pan if you have those available? Thanks
any chance you have any of the factory toolkit remaining? im looking for the spark plug "socket" which is one of the sheet metal type sockets with a hole in the side 18mm
Do you have any of the Givi parts left?
Regards,
Bill W.
816-377-3185
Hey, I am having a real hard time finding a new petcock for my '86, is your's available?
Thanks.
I'm looking for an engine, any chance you still have one?
Quote from: FJ1100mjk on February 12, 2018, 06:36:08 PM
Quote from: 86 the cool ride on February 12, 2018, 06:03:02 PM
Looking for a couple of things to complete my bike the way it ways when i first saw it on the showroom floor. Need left and right air scoops and the black beauty covers that cover the mounting screws. Really only need right side but will take both sides just because. Thanks
If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.
Hi, I am looking for these covers as well and the push plugs for the air intake (both sides) do you have still? Thanks