I replaced the clutch slave. A big shout out to Randy. I ordered on the Friday afternoon of Memorial Day weekend, and He got the part to the East Coast by Tuesday. We are lucky to have the RPM crew.
I picked up a Mighty-Vac bleeder at Harbor Freight, and it shot brake fluid out of every orifice like Linda Blair in the Exorcist. Exchanged it. The second one couldn't hold a vacuum. WTF? I have used this product before with no issues.
I did break my Harbor Freight rule: never buy anything there that has moving parts.
It sucks when you ignore your gut.
Lesson: Life is too short to be a cheap bastard. :flag_of_truce:
Just a dumb question.....do you have the plastic container to catch the brake fluid in the line between the bleeder screw and the vacuum pump? I usually set the catch container inside a coffee can to keep it upright while I am using the Mity Vac.
I spent a little bit more and got my vacuum bleeder from Cycle Gear. It works like a charm.
Fred
I consider everything I buy at Harbor Freight to be an unfinished kit. :biggrin:
Bill
Quote from: CutterBill on June 04, 2017, 05:59:31 AM
I consider everything I buy at Harbor Freight to be an unfinished kit. :biggrin:
Bill
There is a lot of truth in your statement. :good: