FJowners.com

General Category => Maintenance => Topic started by: FJ1200W on February 18, 2017, 05:57:24 PM

Title: Clutch Cover Bolt Torque
Post by: FJ1200W on February 18, 2017, 05:57:24 PM
My computer crashed and I lost my manual, etc.

How hard could it be to find the torque for the clutch cover bolts?

Damn near impossible comes to mind.

Could someone enlighten me please

wtf.....
Title: Re: Clutch Cover Bolt Torque
Post by: FJ1100mjk on February 18, 2017, 06:50:12 PM
Check the Clutch Files, in the Files Section. It may be listed there. I think it's the same or close to the torque of the valve cover bolts. 84 inch pounds I think.
Title: Re: Clutch Cover Bolt Torque
Post by: Pat Conlon on February 18, 2017, 07:08:11 PM
Yeppers....10 n.m. or 7.2 ft/lbs or 86 inch/lbs
http://www.fjowners.com/index.php?topic=1808.0 (http://www.fjowners.com/index.php?topic=1808.0)

Be careful, those small M6 threads in the aluminum case are delicate.
Title: Re: Clutch Cover Bolt Torque
Post by: aviationfred on February 18, 2017, 08:02:52 PM
If you have a Haynes manual. All torques are listed at the beginning of each section.


Fred