Please if possible can someone take a picture
Of their cdi unit please, namely the wiring going into it. Thank you so much .
Mine might of been modded a little.
(http://fjowners.com/gallery/10/1388_24_12_16_1_08_37.jpeg)
Being an electrician I can see several things wrong with that breaker panel but the main thing is I don't see a CDI anywhere inside that thing.
Dave
:bad: The horrors of unskilled labor.....
Hath, if you download an Owners Handbook for your particular model FJ, (it's free) there is a color coded wiring diagram in the back of all handbooks that will show you what you need...
Lots of good info in the Owners Handbooks....see the link in my sig line.
Appreciated pat, someone's been into the wiring and changed wires left right and centre trying to get a grip on it wothout blowing another cdi unit up.
I'm sure I have everything you may need to fix that mess.
Bob w
The Haynes manual does a pretty good job with their wiring diagrams. I have not found a case where the colors do not match up....at least for my 3cv's.
In cas the colors did not come through well in the photo.the wire colors are as follows. Starting at the top
Connector 1,
Black
Orange
Grey
Connector 2,
Black w/white stripe
Black
Orange
Red w/white stripe
Grey
Fred
There's also some diagram pictures in the files section: http://www.fjowners.com/index.php?topic=9216.0 (http://www.fjowners.com/index.php?topic=9216.0)
Not sure if they are for the 1TX, but they are in colour...
Gareth
(//)
84/85 FJ Wiring Diagram
Well no picture
orange | grey
latch black | blank front view harness connector
side looking at pins
red/white | black
orange | gray
yellow/black | black/white same view