FJowners.com

General Category => Maintenance => Topic started by: n8man1068 on February 25, 2009, 02:16:02 PM

Title: One stop shop for chain and sprockets?
Post by: n8man1068 on February 25, 2009, 02:16:02 PM
I'm trying to find a vendor that carries both a chain, and different size sprockets for my 85 fj1100. I'm thinking about going 18/40 on the sprocket size so I can lower my cruising rpm, and thereby reduce bar vibrations. I'd like to order everything from 1 place to minimize shipping costs, and shipping times so I can knock everything out on a Saturday.

There's this chain up on ebay, ID 270276719425

Thoughts/links appreciated.
Title: Re: One stop shop for chain and sprockets?
Post by: Marsh White on February 25, 2009, 03:18:43 PM
I always order from Sprocket Specialists: http://www.sprocketspecialists.com/ (http://www.sprocketspecialists.com/)

The reason I do is I always have to have them flip a FZR1000 rear sprocket around backwards and countersink the screw holes at a 45 degree angle.  They do it in house and have never charged me a cent extra to do it!  Great customer service!

That said though, I think other people have said they may be a bit pricey...  I will continue to always order from them though.
Title: Re: One stop shop for chain and sprockets?
Post by: pdxfj on February 26, 2009, 12:18:53 AM
I will second Marsh's post about Sprocket Specialists.  They are a tad more expensive than other places, but well worth the extra cost.  No BS and excellent customer service.

Title: Re: One stop shop for chain and sprockets?
Post by: n8man1068 on March 05, 2009, 02:40:07 PM
They don't have and 530 chains for a few more weeks. Said they're coming from Japan. Must be coming by Junker!

I guess I can order the chain elsewhere.

On gearing, for the stock '85 it was 17/42, I believe. I'm thinking of going 18/40 to give me a lower cruising rpm. Thoughts/advice/suggestions?

*edit: I really appreciate the work by whomever made the fj gearing spreadsheets!
Title: Re: One stop shop for chain and sprockets?
Post by: rktmanfj on March 05, 2009, 03:46:06 PM
Quote from: n8man1068 on March 05, 2009, 02:40:07 PM
They don't have and 530 chains for a few more weeks. Said they're coming from Japan. Must be coming by Junker!

I guess I can order the chain elsewhere.

On gearing, for the stock '85 it was 17/42, I believe. I'm thinking of going 18/40 to give me a lower cruising rpm. Thoughts/advice/suggestions?

*edit: I really appreciate the work by whomever made the fj gearing spreadsheets!

I have the 18/40 with the YZF600 r/w, and like it a lot.

The wheel/tire I have on now is very close to the same circumference as the stocker.

Even my weak-assed FJ has plenty of grunt to pull those gears.      8)

Randy T
Indy