Print Page - Master cylinder and clutch cylinder

Title: Master cylinder and clutch cylinder
Post by: Sabre093 on April 11, 2016, 02:56:53 PM

Does anybody know the proper size for the resivour screws....length and pitch I want to swap out to Allen head ones..
Thanks

Title: Re: Master cylinder and clutch cylinder
Post by: copper on April 11, 2016, 03:28:26 PM

I don't know I bought mine from Randy

Title: Re: Master cylinder and clutch cylinder
Post by: 4everFJ on April 11, 2016, 03:35:17 PM

If no one knows, I can check the length and pitch tomorrow.

Title: Re: Master cylinder and clutch cylinder
Post by: copper on April 11, 2016, 03:56:50 PM

Found them http://www.rpmracingca.com/proddetail.asp?prod=AllenBrakeResevoirCapScrew (http://www.rpmracingca.com/proddetail.asp?prod=AllenBrakeResevoirCapScrew) didn't think to search "allen" :dash2:

Title: Re: Master cylinder and clutch cylinder
Post by: FJ1100mjk on April 11, 2016, 04:04:11 PM

Quote from: Sabre093 on April 11, 2016, 02:56:53 PM
Does anybody know the proper size for the resivour screws....length and pitch I want to swap out to Allen head ones..
Thanks

M4 x 0.7 x 12 long

Title: Re: Master cylinder and clutch cylinder
Post by: 4everFJ on April 12, 2016, 10:42:50 AM

Quote from: FJ1100mjk on April 11, 2016, 04:04:11 PM
Quote from: Sabre093 on April 11, 2016, 02:56:53 PM
Does anybody know the proper size for the resivour screws....length and pitch I want to swap out to Allen head ones..
Thanks

M4 x 0.7 x 12 long

Yep, and thread length is 9 mm.

Title: Re: Master cylinder and clutch cylinder
Post by: Shane4371 on May 02, 2016, 07:53:50 PM

I took one screw with me to settler hardware.matched it perfectly with a stainless steel screw.

FJowners.com

General Category => Modifications => Topic started by: Sabre093 on April 11, 2016, 02:56:53 PM