Text only | Text with Images

FJowners.com

General Category => General Discussion => Topic started by: Dads_FJ on January 29, 2016, 12:05:11 PM

Title: Bar-end thread size
Post by: Dads_FJ on January 29, 2016, 12:05:11 PM
Quick question, does anybody know the thread size/pitch of the bar-ends?  I need to purchase a tap but don't have them with me to measure.

https://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3AVibranator (https://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3AVibranator)
Title: Re: Bar-end thread size
Post by: Nova on January 29, 2016, 05:28:41 PM
You might want to double check, but I just measured mine with a pair of calipers and I got 16 x 1.25 mm.
Title: Re: Bar-end thread size
Post by: carey on February 02, 2016, 05:07:44 PM
The Yamaha bar end weights I have on my work bench are 16mm x 1.5 pitch
Title: Re: Bar-end thread size
Post by: Dads_FJ on February 02, 2016, 05:10:14 PM
Sweet, thanks guys.
Title: Re: Bar-end thread size
Post by: Nova on February 02, 2016, 05:17:28 PM
Yep, I just rechecked mine. I stand corrected. 1.5mm pitch. I'm going to blame the iffy battery in my digital calipers for that one.  :blush:
Text only | Text with Images