FJowners.com

General Category => General Discussion => What did you do to your FJ today? => Topic started by: FJmonkey on April 26, 2015, 07:13:52 PM

Title: Polished RPM exhaust
Post by: FJmonkey on April 26, 2015, 07:13:52 PM
I got the shiny bits bolted back on and cleaned up for a ride today. Rode up the Crest, wary of others riding in my lane due to recent news... I passed an '84 FJ (Red and Silver) going down so I pulled over and chased it down. Caught up and made contact, pulled over and off he went... Guess he did not want to talk....  :ireful:

Got to Newcomb's Ranch and had a cup O' Chilli, good stuff. Took a pick of the shiny bits and ran back home....

(http://fjowners.com/gallery/8/104_26_04_15_6_01_13.jpeg)

I am really liking the RPM rear shock... Still getting used to it but my confidence is growing like the RPM fork valves. I had a few miles to burn off the rear end today and I was pleasantly surprised to see my Chicken Strips cut in half when I looked at my rear tire...

(http://fjowners.com/gallery/8/104_26_04_15_6_08_33.jpeg)

I also hit the wear bars so new skins next weekend on the rear for the WCR....
Title: Re: Polished RPM exhaust
Post by: Mark Olson on April 26, 2015, 07:42:41 PM
oohhh shiny,, me likey ..  :good2:
Title: Re: Polished RPM exhaust
Post by: Pat Conlon on April 26, 2015, 07:47:12 PM
Looking good Mark :good2:

Next, we work on those white rims.....
Title: Re: Polished RPM exhaust
Post by: aviationfred on April 26, 2015, 07:49:49 PM
Quote from: Pat Conlon on April 26, 2015, 07:47:12 PM


Next, we work on those white rims.....



Almost as out of place as Periwinkle  :wacko2:

BTW, the exhaust looks marvelous  :good:


Fred
Title: Re: Polished RPM exhaust
Post by: ribbert on April 26, 2015, 08:28:45 PM
Quote from: FJmonkey on April 26, 2015, 07:13:52 PM
I also hit the wear bars so new skins next weekend on the rear for the WCR....

Mark, what pressure do you run in your tyre?

Noel
Title: Re: Polished RPM exhaust
Post by: movenon on April 26, 2015, 08:37:53 PM
That's a good looking ride Mark ! Sounds like you are pushing it pretty hard :).  I admire how you guys can ride. Take care my friend.  :drinks:
George
Title: Re: Polished RPM exhaust
Post by: Cash Dereszynski on April 26, 2015, 10:05:49 PM
Quote from: Pat Conlon on April 26, 2015, 07:47:12 PM
Looking good Mark :good2:

Next, we work on those white rims.....
LOL
Title: Re: Polished RPM exhaust
Post by: andyoutandabout on April 27, 2015, 12:00:11 AM
Mark, I too have run across another Fj and made efforts to 'make contact', then told them all about this great forum. Never had one sign up. Perhaps our Fj aura is just too overwhelming for some?
Oh well, keep spreading the word.
Andy
Title: Re: Polished RPM exhaust
Post by: FJmonkey on April 27, 2015, 09:03:09 AM
Quote from: ribbert on April 26, 2015, 08:28:45 PM
Quote from: FJmonkey on April 26, 2015, 07:13:52 PM
I also hit the wear bars so new skins next weekend on the rear for the WCR....

Mark, what pressure do you run in your tyre?

Noel

I run the front at 42 and rear at 40.
Title: Re: Polished RPM exhaust
Post by: FJmonkey on April 27, 2015, 09:06:27 AM
Quote from: andyoutandabout on April 27, 2015, 12:00:11 AM
Mark, I too have run across another Fj and made efforts to 'make contact', then told them all about this great forum. Never had one sign up. Perhaps our Fj aura is just too overwhelming for some?
Oh well, keep spreading the word.
Andy

Considering he was leaving a popular motorcycle hangout near my house, I have a good chance of seeing him again, parked...
Title: Re: Polished RPM exhaust
Post by: 1tinindian on April 27, 2015, 10:54:25 AM
Great start on the polishing Mark, now, about those wheels, Pat and I could lead you further down the path, if you so choose.
Title: Re: Polished RPM exhaust
Post by: FJmonkey on April 27, 2015, 01:10:59 PM
Quote from: 1tinindian on April 27, 2015, 10:54:25 AM
Great start on the polishing Mark, now, about those wheels, Pat and I could lead you further down the path, if you so choose.

The rear wheel get some attention next considering it needs new skin. I don't plan to polish it yet but I will clean it up and add some fresh paint.
Title: Re: Polished RPM exhaust
Post by: FJmonkey on May 04, 2015, 08:23:59 PM
Last Sat I put new rubber on the rear and some cosmetic changes to the rear wheel.

Out with the White, masked off the raw aluminum.
(http://fjowners.com/gallery/8/104_03_05_15_7_53_37_0.jpeg)


A touch of Gold to enhance the new FJ colors...
(http://fjowners.com/gallery/8/104_03_05_15_7_53_44_2.jpeg)

Then off to scrub in the fresh skin...

Newcomb's Ranch had a major event, I have never seen this place this packed...

(http://fjowners.com/gallery/8/104_03_05_15_7_53_51_6.jpeg)

(http://fjowners.com/gallery/8/104_03_05_15_7_53_48_3.jpeg)

They even had a live band...

(http://fjowners.com/gallery/8/104_03_05_15_7_53_58_8.jpeg)

Walking the lot was fun, bikes of all makes and years, no other FJs though.... But plenty of nice things to look at....
Title: Re: Polished RPM exhaust
Post by: Firehawk068 on May 05, 2015, 07:28:02 AM
Nice job Mark!
I am really liking the gold.  :good:

I also enjoy walking the lot at "Bike Night" or Ride-Ins like that.
It's fun to see the variety of bikes that people bring out.
Title: Re: Polished RPM exhaust
Post by: moparman70 on May 05, 2015, 10:55:37 AM
looking good Mark --- paint job looks perfect ---- now you have to keep them clean....... but considering they were white before you must be in good practice.

The white front should be easy to paint now to complete the job.

sc2
Title: Re: Polished RPM exhaust
Post by: FJmonkey on May 05, 2015, 12:06:10 PM
Quote from: moparman70 on May 05, 2015, 10:55:37 AM
looking good Mark --- paint job looks perfect ---- now you have to keep them clean....... but considering they were white before you must be in good practice.

The white front should be easy to paint now to complete the job.

sc2

Yep, the front will get updated when the tire is replaced.
Title: Re: Polished RPM exhaust
Post by: movenon on May 05, 2015, 01:22:55 PM
I like the gold color with that bike.  :good2: The polished edges will set it off nicely.
George
Title: Re: Polished RPM exhaust
Post by: Mark Olson on May 05, 2015, 02:11:15 PM
looks good ,  :good2:
Title: Re: Polished RPM exhaust
Post by: aviationfred on May 05, 2015, 03:07:16 PM
Gold and silver trimmed paint, Gold and silver wheels, add the iridium windscreen and you will be all set for the Rally.

(http://i119.photobucket.com/albums/o145/aviationfred/temporary_zpskxq2p0ry.jpg) (http://s119.photobucket.com/user/aviationfred/media/temporary_zpskxq2p0ry.jpg.html)

Fred

BTW, the gold wheel looks great.  :good2: :drinks:

Fred
Title: Re: Polished RPM exhaust
Post by: 1tinindian on May 05, 2015, 04:12:26 PM
Nice job on the wheel Mark!
(Polisher approved)