Hi Im doing the gixxer rear wheel swap and was wondering you guys that have done it what length of rear brake hose did you use ? was it the fj one or a standard length gixxer one or longer ?? thanks Scotia :)
I used Galfer as the brand and standard length 1992 GSXR750 Baided line for mine
Fred
Thanks very much for the reply :good2:
Here is what I did:
The loop.
(http://fjowners.com/gallery/8/104_26_03_15_3_56_43_4.jpeg)
The anchor on the chain tension bolt.
(http://fjowners.com/gallery/8/104_26_03_15_3_56_40_3.jpeg)
The anchor bracket - I have 4 Monkey made of these left.
(http://fjowners.com/gallery/8/104_26_03_15_3_56_37_2.jpeg)
The length - original was 28.5", now 27.5"
(http://fjowners.com/gallery/8/104_26_03_15_3_56_34_1.jpeg)
The end at the master - Top is current, bottom is a better angle if you can find it.
(http://fjowners.com/gallery/8/104_26_03_15_3_54_22_0.jpeg)
Quote from: FJmonkey on March 26, 2015, 05:03:12 PM
Here is what I did:
The loop.
(http://fjowners.com/gallery/8/104_26_03_15_3_56_43_4.jpeg)
I've often wondered about the over the top routing, is there any reason it can't go directly from the m/c to the caliper, like below?
(https://farm9.staticflickr.com/8246/8492314288_a6bc694946_c.jpg)
Noel
Quote from: ribbert on March 26, 2015, 09:01:43 PM
I've often wondered about the over the top routing, is there any reason it can't go directly from the m/c to the caliper, like below?
Noel
Clearly it can, please post more on how you did it....