G'day all, I have lost the rubber stop that is fixed onto the LHS exhaust to stop the centre stand crashing against the pipe when the bike comes off the stand. :unknown:
Does anyone know the depth of the rubber bumper?
I have a rubber door stop they I will turn down to suite but I need the depth to be correct otherwise I can see the stand hitting the road on tighter turns due to it not being short enough.
I appreciate your help in advance.
Be Good.
Macca
Here is a link that shows the OEM exhaust bumber being used on a huge amount of other Yamaha models. Number 16 in the diagram.
http://www.partzilla.com/parts/detail/yamaha/YP-371-27114-00-00.html (http://www.partzilla.com/parts/detail/yamaha/YP-371-27114-00-00.html)
Fred
Quote from: Tony Mac on August 03, 2014, 01:18:58 AMG'day all, I have lost the rubber stop that is fixed onto the LHS exhaust to stop the centre stand crashing against the pipe when the bike comes off the stand.
Macca
Macca,
Here is the Parts Diagram, and as said by Fred, it is Index # 16 there.
http://www.2wheelpros.com/oem-parts/1992-yamaha-fj1200ad-exhaust-assembly.html (http://www.2wheelpros.com/oem-parts/1992-yamaha-fj1200ad-exhaust-assembly.html)
Click on the Part NAME there, and then scroll down to see all of the Yamaha vehicles which use that part.
Here is the Index link:
http://www.2wheelpros.com/oem-parts/1992-yamaha-fj1200ad.html (http://www.2wheelpros.com/oem-parts/1992-yamaha-fj1200ad.html)
Cheers,
Red
It's 24mm dia. by 18mm deep.
John
Thanks everyone, I'm on to it.
Be Good.
Macca.