decided to put pod filters on after i get done cleaning the carbs because the airbox was a major PITA. what im wondering is with putting on pod filters with a stock exhaust what carb mods will i need to do? different size pilots, adjust mixture screws anything i need to do or with the stock exhaust still will it be ok?
Review the information under "Jetting" at this site...
http://Fjowners.wikidot.com/pods (http://fjowners.wikidot.com/pods)
Good luck.
If you only add pods you may not need to re-jet. Your pipe is the other restriction to what the jets needs. If you also change your pipe then the open system will need more fuel..